Industry

Automotive | Displays / HMI | General Manufacturing | Product News

IUT-F190-B40 UHF Read/Write Head with Integrated Industrial Ethernet Interface and REST API Expands the Pepperl+Fuchs RFID Portfolio

Pepperl+Fuchs is expanding its comprehensive portfolio of identification solutions with the introduction of the IUT-F190-B40 UHF RFID read/write head, which offers an integrated industrial Ethernet interface and REST API. Using these interface technologies, the IUT-F190-B40, which is designed for medium detection ranges, can be quickly and easily integrated into OT and IT systems.

Read More IUT-F190-B40 UHF Read/Write Head with Integrated Industrial Ethernet Interface and REST API Expands the Pepperl+Fuchs RFID Portfolio
Automotive | Connectors / Cables / Terminal Blocks | General Manufacturing | Product News

Balluff: Powerful Technology for Full Flexibility

Outstanding performance, low costs, flexible topology and easy handling: these are the advantages of the industrial Ethernet technology, EtherCAT. EtherCAT provides full flexibility: a free topology selection, the possibility of connecting and disconnecting devices and segments during operation, and the performance redundancy of the ring topology. EtherCAT is suitable for both centralized and decentralized architectures, supports Master/Slave, Master/Master, and Slave/Slave communication.

Read More Balluff: Powerful Technology for Full Flexibility
Automotive | General Manufacturing | Industrial | Product News | Test and Measurement

DOLD: Safe Sensorless Standstill Monitoring

The safe sensorless standstill monitor UG 6946 from the SAFEMASTER S series detects the standstill of 3-phase and 1-phase motors independent of the direction of rotation. This means sensors such as encoders or proximity switches are not required. Access to the danger zone of a system is only possible by the enabling signal of the standstill monitor after the drive has been switched off and run down.

Read More DOLD: Safe Sensorless Standstill Monitoring
Connectors / Cables / Terminal Blocks | General Manufacturing | Power Distribution & Energy | Product News

Raychem RSTI-VS Separable Connector With Voltage Sensor

TE Connectivity has launched its Raychem smart RSTI-VS separable connector with voltage sensor, which can be used for grid monitoring and advanced earth fault and short circuit detection in IEC markets. Together with grid monitoring devices such as Kries’ IKI-50, distribution network operators can deploy condition monitoring, advanced fault detection and failure prediction in their networks.

Read More Raychem RSTI-VS Separable Connector With Voltage Sensor
Drives / Loop Controllers / PACs / PLCs | Industrial | Product News

Beckhoff: C70xx – Ultra-compact Industrial PCs in IP 65/67

Following the current trend, this space-saving IP 65/67 Industrial PC hardware with flexible mounting options is ideally suited for implementing advanced Industrie 4.0 solutions. A wide variety of onboard interfaces enables the networking of machine or plant sections in the cloud or other networks. Moreover, the integrated EtherCAT P connection offers undreamt-of possibilities for the direct connection of actuators and sensors via EtherCAT P Box modules with IP 67 protection.

Read More Beckhoff: C70xx – Ultra-compact Industrial PCs in IP 65/67
Connectors / Cables / Terminal Blocks | General Manufacturing | Industrial | Product News

Weidmuller WPD – New Color Offering

In expanding their commitment to providing standard duty connections, Weidmuller was recently proud to announce the addition of a new color-coded Power Distribution Block series to their already impressive selection of IP 20 feed-through terminals. These DIN rail/direct mountable blocks are intended for distributing main power sources for low voltage (600V AC/DC, 30-310A) applications, utilizing large wire sizes, and of course, maintaining finger-safe connections.

Read More Weidmuller WPD – New Color Offering
Automotive | General Manufacturing | Product News | Sensors

Excelitas Technologies Introduces New LINOS d.fine HR Area Scan Module

Excelitas Technologies Corp. recently announced the LINOS d.fine HR Area Scan Module, which enables area scan applications for the company’s d.fine HR 2.4/128 3.33x High Resolution Inspection Lens. The combination of d.fine HR Lens and new Area Scan Module features a large image circle up to 82 mm and a high resolution up to 300 Lp/mm in a spectral distribution of 400 nm – 750 nm.

Read More Excelitas Technologies Introduces New LINOS d.fine HR Area Scan Module
Automotive | Connectors / Cables / Terminal Blocks | General Manufacturing | Industrial | Power Distribution & Energy | Product News

Phoenix Contact: New Connectors for Photovoltaics

New connectors as well as cable-based string fuses extend the SUNCLIX product series for photovoltaic systems from Phoenix Contact. The device connectors are particularly suitable for cabling inverters and string combiner boxes. The fast screw connection saves you time and money during installation. A patented Unlock system enables smaller actual dimensions as well as convenient release without the need for a special tool.

Read More Phoenix Contact: New Connectors for Photovoltaics
Circuit Protection | Data Centers | Product News

Phoenix Contact: Protection for Telecommunications Applications

Phoenix Contact’s protective devices in the TERMITRAB complete product family provide a high level of protection against overvoltages in a minimum amount of space. With the TTC-6-1×2-TELE devices, two new product variants are now available for fast VDSL applications with data transmission speeds up to 300 Mbps. The products are specifically tailored to the requirements for data transmission with Super Vectoring.

Read More Phoenix Contact: Protection for Telecommunications Applications
Data Centers | General Manufacturing | Industrial | Product News | Tools for Panel Builders

Quick Ethernet Connections With the Cat 6a Cable Splicer

Stewart Connector, a Bel group company, recently announced the release of their tool-less Cat 6a Cable Splicer. Stewart Connector’s cable splicer is a time-saving solution for Ethernet connections that require field terminations. The cable splicer is designed to create easy connections between patch cables and installation cables for consolidation point applications or for end-to-end links.

Read More Quick Ethernet Connections With the Cat 6a Cable Splicer
Automotive | Circuit Protection | Data Centers | Healthcare | Industrial | Power Distribution & Energy | Product News

SCHURTER: UMT-H Surface Mount Fuse Is Petite and Powerful up to 50 A

SCHURTER’s prominent UMT-H surface mount ceramic fuse family now includes 40 A and 50 A current ratings with an impressive breaking capacity rating of 500 A at 125 VAC / 72 VDC. The series provides unprecedented overcurrent and short circuit protection performance in a package size of 5.3 x 16 mm. The UMT-H was originally developed to provide a smaller alternative to through-hole mounted 5 x 20 mm cartridge fuses, commonly used for primary circuit protection.

Read More SCHURTER: UMT-H Surface Mount Fuse Is Petite and Powerful up to 50 A
Enclosures | Marine / Offshore | Product News | Transportation

Pixus Releases MIL-grade Version of RX310 Software Defined Radio

Pixus Technologies, a provider of embedded computing and enclosure solutions, has recently announced a new implementation of its ruggedized enclosure utilizing NI’s Ettus Research brand Software Defined Radio (SDR). The RX310-X03 enclosure is designed to MIL-STD-810 for shock/vibration/environmental and MIL-STD-461 for EMI. It features MIL 38999 connectors for the front and rear I/O interfaces.

Read More Pixus Releases MIL-grade Version of RX310 Software Defined Radio
Automotive | General Manufacturing | Industrial | Product News | Switches / Indicators / Relays / Solenoids

Siemens: Control the Speed Directly on the Machine With SIRIUS ACT ID Key-Operated Switches

The easiest way to control the speed directly on the machine is to use an analog potentiometer. However, wearing gloves in dusty or humid environments, for example, makes operation more difficult. Therefore, the use of the robust SIRIUS ACT ID key-operated switch as a digital potentiometer is particularly suitable under these environmental conditions. This alternative with freely programmable IO-Link electronic module enables precise and fine-grained speed adjustment due to its tactile detent positions.

Read More Siemens: Control the Speed Directly on the Machine With SIRIUS ACT ID Key-Operated Switches
Data Centers | General Manufacturing | Product News | Thermal Management

Equipment Cooling for Data Centres & Plants: Why Your HVAC SYSTEM is a Poor Climate Control Unit

Data Centre and Plant Managers working in small and mid-sized businesses often find themselves searching their buildings for unused space to house the company’s IT and other enclosures. Mailrooms, empty offices, janitors’ closets…all have been repurposed into data closets holding one to a few racks. This approach may be the right choice in terms of square footage needed, but when it comes to proper climate conditions for sensitive IT equipment, it could not be more wrong.

Read More Equipment Cooling for Data Centres & Plants: Why Your HVAC SYSTEM is a Poor Climate Control Unit
General Manufacturing | Industrial | Product News

Littelfuse Launches Web Page for General Industrial Processing and Manufacturing

Littelfuse, Inc. recently launched an industrial manufacturing and processing web page focused on safety. “The new industrial-focused web page puts educational resources at the fingertips of safety and manufacturing professionals,” said Debra Jayson, Senior Marketing Manager, Littelfuse Industrial Business. “Worker safety is a major concern in this industry. This new page provides application information and training materials to help improve electrical safety in key areas such as shock and arc-flash protection.”

Read More Littelfuse Launches Web Page for General Industrial Processing and Manufacturing
Automotive | Data Centers | General Manufacturing | Industrial | Oil & Gas | Power Distribution & Energy | Product News

Attractive New M5 Magnetic Catches From SOUTHCO Hold Panels and Doors in Place

SOUTHCO has recently introduced the latest product in its successful line of magnetic catches, with a new version that combines strength and style. Constructed of corrosion resistant stainless steel, the M5 Magnetic Catch combines a highly polished finish with the holding power of rare earth magnets to provide a robust and attractive solution for keeping doors and panels open or closed.

Read More Attractive New M5 Magnetic Catches From SOUTHCO Hold Panels and Doors in Place

Subscribe to our Free Weekly Newsletter

Subscribe to Our Brands…

Visit our Brand Sites…