Connectors / Cables / Terminal Blocks

icotek: Expansion of the KEL-DPZ-KX/KL Cable Entry Plate Series 
| |

icotek: Expansion of the KEL-DPZ-KX/KL Cable Entry Plate Series 

KEL-DPZ cable entry plates are designed to route and seal a large number cables without connectors, hoses or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space. The KEL-DPZ products are a cost and time saving alternative to traditional cable glands. The KEL-DPZ-KX/KL (IP65) size was created especially for Rittal KL/KX terminal boxes. It was designed for routing up to 72 cables through the pre-cut standard cut-out. The self-tapping screws required for assembly are included in the scope of delivery.

WAGO: 811 Series 811-1316 2-Conductor Fuse Holders
| | |

WAGO: 811 Series 811-1316 2-Conductor Fuse Holders

WAGO’s DIN-Rail mount 811 series fuse holders provide users with maintenance-free, vibration-proof, and corrosion-resistant connection using Class CC & 10 x 38 mm fuses. This new addition has a max voltage of 1,500 V DC, and UL 4248 certified, making it perfect product for high voltage applications seen in motor control, power distribution and the solar industry.

Wieland: SELOS + FASIS DIN Rail Terminal Block Assemblies
| |

Wieland: SELOS + FASIS DIN Rail Terminal Block Assemblies

SELOS + FASIS: Fully built terminal block assemblies with no minimum order quantity – Simplify your purchasing and save valuable time by letting Wieland build your terminal block assembly. Request a quote to get started, and the Wieland application engineering team will contact you, get the details of your project, then start designing it in an e-plan compatible format. Once you approve the design, they get to building. There is no minimum order quantity – whether the batch size is 1 or 1,000, Wieland will deliver the exact quantity you need – starting from just 1 piece.

nVent Hoffman: CEPRL – Cable Entry Gland Plate Round
| |

nVent Hoffman: CEPRL – Cable Entry Gland Plate Round

Quick and easy to install without tools, CEPRL round cable entries are ideally suited for applications that require many incoming or outgoing cables and have limited installation space. Quick and easy to install without tools, round cable entries are ideally suited for applications that require many incoming or outgoing cables or pneumatic conduits inside an enclosure. The snap-in system is designed for wall thicknesses of 1.5 to 2.5 mm.

AutomationDirect: LUTZE SUPERFLEX Shielded Continuous Flexing Control Cable
| |

AutomationDirect: LUTZE SUPERFLEX Shielded Continuous Flexing Control Cable

AutomationDirect has added LUTZE SUPERFLEX control cable that is well-suited for short to medium-length articulated drag chain (C-tracks) installations requiring moderate to high performance. The High Glide TPE insulation and PVC outer jacket provide resistance to sunlight, oil, and moisture penetration, and make this cable ideal for indoor wet and dry applications or outdoor installations.

Weidmuller: RockStar Fixed-Pole HDC System
| | | | |

Weidmuller: RockStar Fixed-Pole HDC System

Extremely tough models are required outside the cabinet. They must be resistant to electromagnetic interference, as well as impact resistant and vibration-proof. This is why you should turn to genuine RockStars when choosing your connectors. Weidmuller’s broad portfolio of heavy-duty connectors offers the right solution for all requirements for the transmission of energy, signals, and data outside the cabinet. With the perfect composition of inserts, enclosures, and contacts, you will be guaranteed to hit the right notes and offer the ideal solution for every task.

AutomationDirect: Helukabel TRAYCONTROL 600V Flexible Control Cable
| |

AutomationDirect: Helukabel TRAYCONTROL 600V Flexible Control Cable

AutomationDirect has added the versatile and highly flexible Helukabel TRAYCONTROL 600V control cable that is ideal for industrial control, power, and instrumentation applications. The individual bare copper conductors are stranded for flexibility and are covered with a black PVC/nylon insulation with white numbering for easy identification. A green with yellow stripe ground conductor is also included with cables containing more than two conductors.

Weidmuller USA: New OMNIMATE 4.0 Terminal Blocks Featuring SNAP IN Technology
| |

Weidmuller USA: New OMNIMATE 4.0 Terminal Blocks Featuring SNAP IN Technology

Weidmuller USA is pleased to introduce the new OMNIMATE 4.0 PCB Terminal Blocks in the MTS 5 product series. These innovative terminal blocks mark an exciting expansion of the company’s PCB product portfolio. Featuring Weidmuller’s innovative SNAP IN technology, the OMNIMATE 4.0 Terminal Blocks provide the most efficient wiring and signal transmission in many industrial sectors. With this new technology, a wide variety of conductors can be connected quickly without the need for tools and wire-end ferrules, making OMNIMATE ideal for the full spectrum of automated processes.

SCHURTER: DG11/DG12 Series Classic Power Entry Module with Circuit Breaker Gets Even Better
| | | | | | |

SCHURTER: DG11/DG12 Series Classic Power Entry Module with Circuit Breaker Gets Even Better

SCHURTER series DG11 and DG12 with and without mains filter features a first-of-its-kind ingress protection solution for IEC inlets, consisting of a seal gasket between the connector and mating V-Lock power cord. The blue colored latch of the V-Lock power cord and blue inlay of the appliance inlet indicate that the two have been equipped to provide an IP54 rating under load. The unit is screw mounted and rated IP67 between the power entry module and the panel.

Banner: BR Series M8 & M12 Receptacles – Simplify Control Panel Connections
| |

Banner: BR Series M8 & M12 Receptacles – Simplify Control Panel Connections

Panel builders have new tools for bringing power and signals back into protected areas with Banner’s M8 and M12 receptacles. These receptacles let users easily connect devices to a panel while maintaining a waterproof IP67 rating. Maintenance is also simplified: if a cable is damaged between a field device and the control panel, simply swap the damaged cable for a new one—no rewiring is needed in the panel. The slim profile leaves no bulky threads sticking out, allowing an easier fit into tight panels.

Stego: LED 121/122 Varioline Lamp with Socket
| |

Stego: LED 121/122 Varioline Lamp with Socket

The LED 121/122 Varioline is a powerful and compact LED light with integrated receptacle for use in enclosures. Featuring socket standards of many European countries as well as the US and Australia, it allows for the power connection of laptops and diagnostic devices. Its LED tube emits more than 1,000/1,700 Lm thereby illuminating even very large enclosures in their full depth and height. The glare-free, 120° rotatable light tube uses Mid-power LEDs with a service life of 60,000 hours.

WAGO: 221 Series Compact Splicing Connector – Connection Technology for Hazardous Areas
| | | |

WAGO: 221 Series Compact Splicing Connector – Connection Technology for Hazardous Areas

The 221 Series Compact Splicing Connector for hazardous areas offers entirely new design possibilities, particularly for the manufacturers of distribution boxes, terminal boxes, lights or electronic devices. The light gray “Ex protection” version also retains all the advantages of the 221 Series. As an all-purpose terminal block of ignition protection type Ex e (“Increased Safety”) it can be used for all applications in zones 1 and 2. The ease of handling of the 221 Series is also reproduced in the version for hazardous areas: Pull the lever up, insert a conductor, release the lever.

Fischer: Core First Mate Last Break Connectors Ensure Electrical Safety and Mechanical Reliability for Medical Devices
| |

Fischer: Core First Mate Last Break Connectors Ensure Electrical Safety and Mechanical Reliability for Medical Devices

Fischer Connectors has released new First Mate Last Break connectors in its low-voltage multipole Fischer Core Series, to offer outstanding levels of electrical safety, mechanical reliability and ease of use for operators of medical devices in compliance with IEC 60601-1. As its name denotes, First Mate Last Break (FMLB) ensures the permanent ground presence of an electrical system through a longer pin in the plug that “mates first and breaks last” with the system’s receptacle to avoid risky electrical safety conditions.

CDM Electronics Is Now An Authorized Stocking Distributorship For Positronic
| | |

CDM Electronics Is Now An Authorized Stocking Distributorship For Positronic

CDM Electronics has announced an agreement with Positronic to stock and distribute their line of high-reliability Rack & Panel connectors, contacts and accessories at their Turnersville, NJ location. Positronic, a subsidiary of Amphenol Corporation, is one of the world’s major manufacturers of interconnect products for defense, industrial and commercial applications. CDM now provides the full range of Positronic GAP and GAPL series PCB-terminated rectangular connectors, along with the MIL-DTL-28748-qualified GM and GMCT series connectors.

AutomationDirect: Murrplastik Two-Piece Flex Split Conduit
| |

AutomationDirect: Murrplastik Two-Piece Flex Split Conduit

AutomationDirect has added EWT-PA series flexible, non-metallic, two-piece split conduit from Murrplastik. This flex split conduit provides an easy solution for routing pre-terminated cables, eliminating the need to dismantle/reassemble the installed connectors. The EWT-PA series conduit consists of dual overlapping tubes that are easy to open yet provide mechanical protection and eliminate unintentional exposure of the cabling bundle inside. This conduit is ideal for cable installations on cobots, gantry systems, or any retrofitting application.