ACME Electric dry-type encapsulated single-phase distribution transformers provide reliable voltage conversion for commercial and industrial power distribution applications. Available in ratings from 250 VA to 5 kVA, these 60 Hz transformers offer 240/480 VAC, 600 VAC, or selectable 120/208/240/277 VAC primary configurations with 120/240 VAC secondary output.
RS supports panel-centric MRO strategies with an extensive selection of high-quality standardized, serviceable control panel components engineered, tested, and proven to reduce industrial control panel lifecycle costs without sacrificing quality or performance. Control panels are indispensable for industrial automation — integrating the power distribution, control logic, motor switching, and industrial communications components that essentially serve as the brains and central nervous systems of these systems within a single protected enclosure.
RS offers an extensive selection of Omron Automation industrial control panel products engineered to enable more efficient, resilient control systems, maximize uptime, and reduce operating risks in demanding next-generation AI data center, edge AI, and IIoT applications. The rapid rise of AI is fueling an unprecedented wave of data center development and a $1 trillion global infrastructure supercycle, leading hyperscale providers to invest hundreds of billions of dollars into high-density data capacity and push rack densities into the megawatt range.
ABB has launched its thyristor-based water-cooled UNIREC H2 power rectifier for green hydrogen production, engineered to help operators reduce energy losses and operating costs as projects scale. Designed to convert AC electricity from the grid into the high-current DC power required by electrolyzers, UNIREC H2 multi-pulse thyristor rectifier is designed to achieve power conversion efficiency of up to 99.6 percent at nominal current1. Each unit can be configured to deliver up to 7.5 MW of DC power and 6 kA of output current, while modular architecture supports hydrogen plants ranging from megawatt-scale installations to projects exceeding 1 GW.
Mouser Electronics is now stocking the FN3060 3-phase filters from TE Connectivity / Schaffner. The Schaffner FN3060 3-phase filters are designed for 480VAC nominal operation, with current ratings of 20A to 250A, and comply with IEC and UL standards. These filters achieve the switching of the Y-capacitor/resistor value via the Detachable Earth (DE) terminal. The FN3060 3-phase filters feature a low leakage current of 4mA, making them suitable for grids with stringent requirements or sensitive CFCIs and ideal for safety and reliability applications.
Bel Fuse Inc. recently announced its XRCM 200 and 300 Series, the second-generation DC-DC converters with ultra-wide input range. Designed for demanding railway and transportation applications, the new converters combine a compact form factor, ultra-wide input voltage range, and high efficiency to help engineers simplify system design while meeting stringent railway reliability and safety requirements.
ABB recently announced the launch of Infinitus, a portfolio of direct current (DC) solutions designed to manage the increasing power demands of AI data centers. The portfolio will accelerate the adoption of DC architectures in data centers improving energy efficiency and reducing power infrastructure footprint, while increasing available computing capacity. ABB expects other energy-intensive industries to make the same transition.
Mouser Electronics, Inc. offers an extensive selection of solutions from Bourns. Mouser currently stocks over 21,000 Bourns parts, with more than 50,000 parts available to order. Over the past 15 years, Mouser has received eight Global Distributor of the Year awards from Bourns, along with two European Distributor of the Year awards. Available from Mouser, the MAG-3002584 high-power inductor offers 87 µH inductance for high-frequency power factor correction (PFC) and inverter applications in high-voltage three-phase power systems.
DIMAAG-AI, Inc. and Toshiba International Corporation (TIC), a Toshiba America Inc. (TAI) Group Company and a wholly owned subsidiary of Toshiba Corporation (Toshiba), have recently announced a collaboration to develop next-generation energy storage solutions for AI infrastructure using Toshiba’s SCiB lithium titanium oxide (LTO) battery technology. The collaboration combines Toshiba’s high-power SCiB LTO battery technology with more than 100 million cells shipped since 2010 and over a decade of proven safety record and DIMAAG’s active-flow immersion-cooled battery architecture, designed to support continuous 10C charge and discharge cycling over a targeted 10+ years of service life.
Gigabit Ethernet connectivity and daisy chaining for up to 16 PDUs per IP address help simplify deployment, reduce network overhead and support scalable rack expansion.
Weidmuller USA has recently introduced DURAmax DC UPS, offering a secure and reliable 24V uninterruptible power supply for use in a wide range of industrial applications. This innovative solution supplies PLCs, sensors and other devices with 24V voltage safely and without interruption. In the event of a mains power failure, the DURAmax DC UPS automatically transitions to battery operation, ensuring continuous system availability and preventing unplanned system downtime. With its compact design, the DURAmax family enables installation in the tightest control cabinets while delivering robust backup power performance.
Toshiba International Corporation’s Power Electronics Division recently announced the launch of the Toshiba 1610XPi Series UPS, a new single-phase uninterruptible power system designed to help organizations protect critical equipment and support operational continuity in demanding environments. Available in 6kVA and 10kVA models, the 1610XPi Series strengthens Toshiba’s growing portfolio of critical power solutions for applications that require resilient, high-performance power protection.
The OMRON S8NR Series is an IP67 rated industrial power supply designed for out of panel installation in harsh environments where dust, moisture, vibration, and accessibility challenges impact reliability. By moving the power supply outside the control panel, S8NR reduces enclosure complexity, electrical labor, and service time while maintaining stable, protected DC power delivery.
Schneider Electric has recently announced the next generation of APC Smart-UPS, the industry’s first monolithic multi-chemistry uninterruptible power supply (UPS) for distributed IT and edge environments. The new Smart-UPS runs on valve-regulated lead-acid (VRLA) or lithium-ion batteries and supports future battery chemistries, allowing customers to upgrade the battery without buying a new UPS. The platform debuted at the Xchange channel partner event (August 9–11).
These upgrades are a cost-effective alternative to equipment replacement. By upgrading, customers can experience improved performance and capabilities, updated systems with the latest technology, and a prolonged lifespan for their mission-critical equipment.
Mouser Electronics, Inc., the authorized global distributor with the newest electronic components and industrial automation products, is stocking the latest products from Omron Industrial Automation, a world-leading supplier of advanced electronics and control system components. Mouser’s global distribution partnership with Omron supports Mouser customers in developing solutions for industrial automation, smart agriculture, warehouse and fulfillment,…