The CX7051 Embedded PC has an ARM Cortex-M7 single-core processor with 480 MHz. In the basic configuration, the CX7051 has a slot for a microSD card and an Ethernet interface. As a special feature, the CX7000 series has eight integrated multi-functional inputs as well as four integrated multi-functional outputs. The CX7051 has a CANopen responder (slave) interface.
AutomationDirect has added Epson LabelWorks portable label printers for your wire marking needs. The Epson PX series label printers are available in four different models and support 3 to 36mm [1/8 to 1-1/2 in] labels. The LW-PX300 is a low-cost, compact wire-marking, bar code, and general-identification label printer. The LW-PX400 printer is a portable, wireless industrial labeling and wire-marking printer that is Bluetooth compatible and works with iOS or Android mobile devices.
Polycase is excited to announce the extension of the WQ Series with the addition of a new size, the WQ-51. This new size measures 10.24 x 6.30 x 5.12 inches and is UL & cUL Listed (file no. E194432), NEMA 4X rated, and designed for outdoor applications. The WQ Series is known for its durability, and the WQ-51 is no exception. It features a fiberglass-reinforced polycarbonate base and polycarbonate cover (available in clear or gray), with stainless steel latches and a continuous gasket that meets IP65, IP66, and IP67 specifications.
Rockwell Automation, Inc. has recently announced the release of its new Allen‑Bradley ArmorBlock 5000 I/O blocks. Integrated with IO-Link technology, the distributed I/O solution offers smart capabilities that can help industrial manufacturers improve operational productivity with minimal cost. Manufacturers can deploy and maintain smart automation more efficiently with the ArmorBlock 5000 I/O solution. With the highly integrated IO-Link capabilities, machine design complexity is reduced through simpler device configuration and better integration with Allen‑Bradley controllers.
The Q20-2 is a new polarized retroreflective photoelectric sensor designed for reliable detection, quick installation, and precise beam alignment. Its bright, visible red LED features best-in-class bore sighting, ensuring that the beam spot hits repeatably where it is intended. The Q20-2 features an industry-standard compact housing and robust threaded 3-mm mounting holes.
The M12 connectors with push-pull fast-locking from Phoenix Contact can be connected easily and tool-free. The installation is reliably protected by Advanced Shielding Technology. The M12 push-pull locking system offers convenient and secure cabling – even in confined spaces and with high cabling density. The M12 connectors are quick and easy to plug in and unplug from the device port, which reduces the installation time by up to 80 percent compared to screw connections. In addition, no tools are required for cabling.
binder offers ready-to-connect connector solutions for the Deutsch DT, AMP Superseal and AMP CPC model series – in combination with connectors from the binder portfolio – as part of its Plug&Play product selection. Connectors pre-assembled with cables are also available if required. In addition, cable switches with wiring options particularly tailored to different applications enable connector systems of different designs to be combined flexibly with one another. In this way, customized connectivity solutions can be created for use in mobile machines.
OKW has recently launched robust new SOLID-BOX plastic enclosures for desktop and wall-mount electronics in challenging industrial and outdoor locations. With IK 08 impact protection, these IP 66/IP 67 sealed enclosures are ideal for a wide range of applications including plant and machine construction, HVAC, IoT/IIoT, smart factory/Industry 4.0, gateways, data loggers, ICT, electrical installations, measurement and control, agriculture and farming, sensor systems and safety engineering.
AutomationDirect now offers industrial-grade Cat6a Ethernet communication cables that support transmission speeds of up to 10 Gbps full duplex. These patch cables are designed to reduce the effects of electromagnetic interference (EMI) by incorporating shielded RJ45 connectors, an inner foil shield around each twisted pair, and an outer foil shield around the entire set of 8 wires.
TeSys Deca contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel.
Introducing the ESP Series Eclipse Swing Panel from Hammond Manufacturing, a hinged panel which allows access to internally mounted equipment and can be hinged from either side. The ESP Series panel is made of 12 gauge steel construction, and comes equipped with slotted quarter turn latches to provide closure, and can even convert into a dead front panel by adding optional locking quarter turn latches (part number EQTRL). This panel also comes complete with 4 depth adjustment brackets.
Deep-Hinged Window Kits provide protection, visibility and easy access to displays, equipment and components installed behind the viewing area. Window kits are conveniently sized to allow direct mounting in the usable door area of any enclosure with a suitably sized mounting surface.
The CAPAROC electronic circuit breaker system from Phoenix Contact now includes modules approved for use in hazardous locations. Equipment installed in potentially explosive areas must meet stringent requirements to ensure reliability and safety standards. Many existing CAPAROC parts have been tested and approved for Class I, Division 2, Groups A, B, C, and D. This makes them suitable for use in hazardous locations in North America.
LUTZE Inc has recently released a new LUTZE Cable Solutions for Industrial Automation North America Catalog to support the fast-growing customer base in North America. LUTZE’s flexible and continuous motion cables such as LUTZE SILFLEX, LUTZE SUPERFLEX, MOTIONFLEX and DRIVEFLEX VFD cables are designed for harsh industrial environments and carry multiple approvals for code compliance. An expanded number of cable series have now been evaluated by Ecolab for resistance to common cleaning agents and chemicals used in washdown procedures.
AutomationDirect has added ProSense F18 series 18mm round to their extensive lineup of photoelectric sensors. The F18 series features sensing distances up to 25m, rugged PBT thermoplastic housings, and an IP67 protection rating. This general-purpose series is available in diffuse, diffuse with adjustable background suppression, polarized retroreflective, and through-beam sensing styles.
Enable faster, more efficient control and monitoring with wide screen models: 7, 9, 12, and 15.
With the ever present need for increased performance, the NA family of HMI terminals makes it fast and easy to implement dynamic intuitive user interfaces that will boost productivity and minimize downtime.