Learn why electricians are using Can-Snap to secure and protect NM cable faster and more conveniently than before. The Can-Snap connector saves time by being faster and easier to install than traditional cable clamps – simply snap in place – it protects cable from knock-out damage while providing strain relief, and it secures NM cable from size 14/2 to 6/3 in 1/2″ and 3/4″ sizes.
With i³ CONTROL, Yaskawa is creating a completely new automation platform. The special feature of this ecosystem, which was presented as a concept for the first time in mid-2022, is that it forms a technically coordinated overall solution for industry-specific controls – from the engineering software to the controller hardware to the integrated chip technology. And, in the future, beyond. As a first anticipation of the continuously growing i³ CONTROL portfolio, the specially developed software environment – i³ Engineer – and the first machine controller of this new platform – the iC9210-PN – experienced their world premiere. Market launch was planned from the end of 2022.
Introducing the 1590Z series Type 4X/6P diecast aluminum enclosures from Hammond Manufacturing. These rugged electronic instrument enclosures are made of a diecast aluminum alloy (tough, yet easy to machine), and feature a two piece “tongue and groove” construction with a replaceable one-piece silicone rubber gasket which provides protection against access of dust and water. The gasket supplied is loose inside the enclosure, not pre-installed, and has a temperature rating of -40C to +150C.
AutomationDirect has added frequency signal conditioners from ProSense. These new signal conditioners are extremely versatile, affordable, and provide the flexibility to convert, transmit, scale, and isolate input signals from a wide variety of process sensors and controller I/O. The SCU-2200 universal analog-to-frequency converters accept milliamp, voltage, RTD, thermocouple, or potentiometer inputs and provide a scalable single-frequency output (up to 25kHz). They are helpful when a controller does not have any analog input points available but does have a frequency input.
PISA-B is an efficient electronic circuit breaker (ECB). It distributes the current, protects your loads from over-current or short-circuits and monitors the operating status in DC 24V systems. The 8-channel programmable capability can identify and isolate individual faulty branches. It shuts down the affected channels only and secures the constant power supply of the remaining loads. An integrated data monitoring reports the operating status to a PLC or control center. The electronic circuit breaker also alarms in case of an error and allows a remote reset of the channels.
Mitsubishi Electric Automation, Inc. recently announced the iQ-R Series CC-Link IE TSN Plus module which supports CC-Link IE TSN and EtherNet/IP networks in one module. CC-Link IE TSN is an open industrial network technology that combines gigabit Ethernet bandwidth with Time Sensitive Networking (TSN) allowing for high-speed motion control, safety, and standard communication I/O devices. EtherNet/IP networks allow for communication with third party devices.
WAGO’s single-channel electronic circuit breakers (ECBs) guarantee reliable protection in the control cabinet. They protect both devices and cables while selectively disconnecting individual current paths, preventing unaffected paths from being shut down. As soon as the corresponding tripping currents are reached or even exceeded, they automatically trip in a set time. The tripping currents can be flexibly parameterized or fixed, depending on the model.
The goal of the All Electric Society is a world in which sufficient energy is available from renewable resources. Electrification is the first step towards achieving this. The new VAL-MB-T2-750DC and VAL-MB-T2-1000DC type 2 surge protective devices from Phoenix Contact provide support here. As the number of DC applications continues to increase, more and more system operators are also using direct current with 650 to 750 V DC in industrial applications.
With the increase in sensor density, actuators and controllers in Industry 4.0 and IIoT operational settings, high power levels and massive amounts of data must be securely and efficiently managed through ultra-fast transmission lines with cables running over long distances. Miniature connectors and cables are needed to interconnect smaller and smaller devices and sensors in areas that are sometimes confined and hard to access. And connectivity must be ruggedized to resist shock, vibration, extreme temperatures, water and corrosion when exposed to demanding environmental and chemical conditions, both indoors and outdoors.
The icotek cable glands and cable entry plates with metric thread are screwed with a locknut during assembly. If the thread lengths are not sufficient, for example when mounting on sandwich panels or thick concrete walls, icotek offers a practical solution: the icotek TE thread extension. The icotek TE thread extension is available in two sizes (M32, M50) and in three lengths (35 mm, 60 mm, 120 mm) and represents a real innovation in the field of cable management. The different lengths can be flexibly combined or shortened at the designated points.
IBOCO’s full line of CL Wire Retainers provide many different sizes to match the myriad of products that compound the IBOCO wire duct series. The full line of CL Wire Retainers are available in Dark Grey RAL 7021. These wire management retainers enable you to retain wires during installation, tremendously facilitating what can be a daunting task. They also provide additional strain relief of wire duct fingers, while eliminating bulging against the sidewall. IBOCO CL wire retainers offer a great time-saving solution to customers.
The CP6xxx and CP7xxx control panels offer a balance between the latest PC technology and long-term availability of control components. Together with the software employed, Control Panels in the most diverse form factors act as the centerpiece of a variety of automation tasks, such as the control of machines, processes and logistic systems, the networking of plant parts, the data acquisition or image processing. For classic control tasks, PC-based control technology offers excellent scalability and flexibility and is therefore increasingly being used in place of hardware PLCs.
Siemens is extending its drive portfolio in the extra-low-voltage range for 24–48V EC motors with its new SIMATIC MICRO-DRIVE. The new product line with UL- and CE-marked components consists of the PDC (Profidrive Control) servo drive in conjunction with a flexible range of motors and connecting cables from product partners, along with the TM (technology module) format with servo and stepper drives in compact 20mm width that can be used in conjunction with distributed or open controllers.
The LC25T In-Line Touch Switch is a sealed, capacitive touch switch that can be connected in-line with many types of DC devices for on/off and PWM (Pulse Width Modulation) dimming control. With a 4-amp output capacity, it can even control the largest of Banner’s DC lights. Its touch interface and colored visual status indication make the LC25T easy to use.
Contec Co., Ltd. has recently developed the BX-M2500 Trellix BOX Computer, an embedded PC with NIST SP800-compliant secure BIOS and Trellix Application Control security software pre-installed to protect against ransomware. Contec began taking orders for this new product on March 23, 2023. The new BX-M2500 Trellix BOX Computer is an embedded PC with an Intel Xeon E-2278GEL processor, high-capacity memory, and high-capacity storage.
AutomationDirect has added more FATH hardware components to their selection of T-slotted rail products. These components easily install in SureFrame rails, as well as many other brands, and include roll-in T-slot nuts with spring loaded ball, slide-in T-slot nuts, screw and miter connectors, 1- and 2-slot pivot joints, extended swivel bases, foot consoles, leveling casters, magnetic catches, sensor mounting blocks, protection profiles, profile sliders, roller elements, and much more.