Dinkle Terminal Blocks Simplify Installation
Dinkle DKU series barrier screw type terminal blocks incorporate enhancements for easier installation and better performance than traditional designs.
Connectors / Cables / Terminal Blocks
-
-
Connectors / Cables / Terminal Blocks | Food & Beverage | Oil & Gas | Pharmaceutical | Product News | Water & Waste Water
HELUKABEL Launches Four Extreme Environment Cable Product Groups
HELUKABEL has launched four new instrumentation and compensating cable product groups for applications in the oil and gas sector, as well as for use in the chemical, pharmaceutical, and food and beverage industries.
-
Unlock the Potential Of Your Machines With Digital Communication
The future of automation starts with IO-Link. Sensors and actuators are the eyes and ears of your equipment. Your machines and processes are limited by what your sensors can tell you. What if you can get more information without increasing cost, engineering time and complexity? What if ifm told you your existing infrastructure could already provide more insight?
-
Wieland Electric Presents MOLA, a New Device Connector for the RST Mini System
The new device connector clearly sets a signal for the future in the area of pluggability, as there is no comparable system on the market. The special features of the new product all revolve around flexible and simple assembly. This is achieved by double conductor connections, which are equipped with a push-in spring, the possibility to prefabricate the components at separate locations and last but not least also by the suitability for automatic wiring.
-
Tinel Ring Swept Elbow Backshells (TXR) From TE Connectivity Offer up to 20% Weight Savings
TE Connectivity recently introduced its new Tinel ring swept elbow backshells (TXR) for screened cables in a wide range of military and aerospace applications. As content continues to grow in military and aerospace systems, customers look for improved efficiency. TE’s TXR swept elbow backshells offer designers the potential for up to 20% weight savings over traditional backshells.
-
HELUKABEL Launches Four New Cable Product Groups
HELUKABEL, a global manufacturer and supplier of cable, wires and accessories, recently announced the launch of four new in-stock instrumentation and compensating cable product groups for applications in the oil and gas sector, as well as for use in the chemical, pharmaceutical, and food and beverage industries. Reliable data transmission is a must, even under the most extreme conditions.
-
binder: The New Locking Clips for 620 and 720 Series
binder’s comprehensive product offering provides a circular connector series for many industrial application sectors. Now, with a new accessory, binder can improve two of its circular connector series with increased security and safety as required by a range of applications. With new locking clips, binder is meeting the increasing demand in the snap-in segment.
-
WAGO: SMD PCB Terminal Block
Introducing the SMD PCB terminal block with push-button and Push-in CAGE CLAMP connection technology from WAGO. The SMD PCB features a push-in termination of solid conductors, and convenient termination/removal of fine-stranded conductors via push-button and operating tool at a height of just 2.7 mm. Available in tape-and-reel packaging.
-
Building Controls | Connectors / Cables / Terminal Blocks | Data Centers | Healthcare | Product News
L-com Develops Antibacterial Cat6a Ethernet Cables
Antibacterial Cat6a Ethernet cables from L-com inhibit bacteria growth by up to 99.9%
-
Quabbin 600V Control Cable from AutomationDirect
AutomationDirect has added Quabbin 600V control cable to our extensive selection of cable offerings. These cables are ideal for use in control panels, conduits, and where superior electrical properties are required. The smaller diameter design for this cable reduces cost and the space required inside panels and conduits. This cable is available in shielded and unshielded versions, ranging from 20AWG to 14AWG, with 2 to 25 conductors.
-
Beckhoff: EL2044 – 4-Channel Digital Output Terminal 24 V DC, 2 A, With Extended Diagnostics
The EL2044 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. The EtherCAT Terminal contains four channels that indicate its signal state by means of light emitting diodes. The integrated diagnostics can be evaluated in the controller and is indicated by the LEDs.
-
Connectors / Cables / Terminal Blocks | General Manufacturing | Healthcare | Industrial | Marine / Offshore | Product News | Water & Waste Water
Marine Grade Push/Pull Appliance Coupler from SCHURTER Offers IP67 and IP69K Protection
Designed for both outdoor and indoor harsh environment equipment, the waterproof appliance coupler set from SCHURTER is rated IP67 when connected or IP69K unconnected, when used with the accessory covers.
-
Bel Fuse: New IP67 Rated USB Type-A Cable Assemblies
Stewart Connector, a Bel group company, recently announced a new line of IP67 rated USB Type-A Cable Assemblies. Designed for use in IoT applications where reliability and functionality are necessary and USB connections are needed outside of typical office applications, these cable assemblies can be used in multiple applications, including industrial automation, medical devices, military applications, and other harsh environments.
-
Connectors / Cables / Terminal Blocks | Data Centers | General Manufacturing | Industrial | Product News
RJ45 Magnetic Modules from Daburn Meet Ethernet Requirements
Daburn Electronics and its Polytron Devices division have developed a family of RJ45 magnetic integrated connector modules that can accommodate a variety of Ethernet-enabled devices.
-
Connectors / Cables / Terminal Blocks | Data Centers | General Manufacturing | Industrial | Product News
ix Industrial from Hirose Available in Space Saving Right Angle Plug
ix Industrial™ right angle plug version has been added as a new variation to the IEC 61076-3-124 standard compliant industrial Ethernet interface connector lineup.
-
Phoenix Contact: New Designs for M17-M40 Pro Series Circular Connectors
Phoenix Contact is extending its M17 to M40 PRO series of circular connectors with new designs: The device and coupler connectors with male and female contacts in the size M23 now provide you with greater flexibility in device connections and in system cabling. They are compatible with both the standard and the ONECLICK fast-locking system. For signal transmission, versions with 6- to 19-positions are available for currents up to 20 A and voltages up to 300 V.
