| |

Wieland Electric Presents MOLA, a New Device Connector for the RST Mini System

PBUS-28-Wieland-MOLA-400.jpg

June 14, 2021

The new device connector clearly sets a signal for the future in the area of pluggability, as there is no comparable system on the market.

The special features of the new product all revolve around flexible and simple assembly. This is achieved by double conductor connections, which are equipped with a push-in spring, the possibility to prefabricate the components at separate locations and last but not least also by the suitability for automatic wiring. Thus, installations with a high degree of protection are significantly simplified and can be individually adapted to any application.

MOLA has been optimized especially with luminaire manufacturers in mind, but is also suitable for installation in other areas of application. Thus, areas such as motors, heaters and controls in general can also benefit from the flexibility of the connection. MOLA is available in 2-, 3- 4- and also 5-pole versions and is designed for through holes of 20 mm, which simplifies a conversion to MOLA, thus a wide range of projects and application areas can be covered.

The modular design ensures that, as mentioned at the beginning, the internal wiring harness and the housing can be prefabricated separately. 

For special requirements, an optional contact sealing can provide additional protection against moisture penetration, so that MOLA can be used even under the most adverse conditions without any problems.

Important_Links_Bar.jpg

https://www.wieland-electric.com/en/company/news/public-relations/innovation-by-modular-design/

 

Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More


Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.


Products for Panel Builders

  • icotek: Expansion of the KEL-DPZ-KX/KL Cable Entry Plate Series 

    icotek: Expansion of the KEL-DPZ-KX/KL Cable Entry Plate Series 

    KEL-DPZ cable entry plates are designed to route and seal a large number cables without connectors, hoses or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space. The KEL-DPZ products are a cost and time saving alternative to traditional cable glands. The KEL-DPZ-KX/KL (IP65) size was created especially for Rittal KL/KX… Read More…

  • Pilz: PNOZ m ES 16DI PNOZmulti 2 Small Controller Input Module

    Pilz: PNOZ m ES 16DI PNOZmulti 2 Small Controller Input Module

    Have you selected the appropriate base unit for your application? Various expansion modules can be docked to a PNOZmulti 2 base unit, depending on the requirement: For example: I/O modules, motion monitoring modules and link modules. To monitor pushbuttons and other digital sensors, you can use the input module PNOZ m ES 16DI for standard applications. Configurable in the software… Read More…