AutomationDirect has added Endress+Hauser iTHERM and iTEMP series temperature transmitters that offer precise and reliable temperature measurements with easy integration, a rugged design, flexible configurations, and IO-Link or HART communication options.
The SCHURTER DG11 power entry module, which has been optimized and proven over many years, is now available in a version with an additional magnetic release to protect against very high overcurrents (short circuit) at the integrated TA35 circuit breaker. Circuit breakers are usually designed according to the thermal principle with a bimetal. If a defined temperature is exceeded due to the overcurrent, the circuit is interrupted. Once the bimetal has cooled down, the device is ready for use again. However, this process is very slow. For this reason, thermal circuit breakers are usually combined with a fuse.
TPC Wire & Cable’s new Thermo-Trex High Temp Reeling Cable is built for extreme heat and high-tension applications. Designed for reeling systems, it withstands conductor temperatures up to 200°C (392°F) and features a double-pass reinforced silicone jacket with an aramid center strength member for superior resistance to twisting and pulling. Engineered for tough environments in metals/steel, mining, and wood, pulp & paper industries, this cable is perfect for transfer cars, ladle cars, cranes, cable reels, hoists, pendants, and drying systems, delivering reliable performance in high-heat, high-tension applications.
When reliable electrical connections are required in the smallest of spaces, binder’s M9 portfolio offers compact circular connector solutions that perform even under demanding conditions. The 702, 711, and 712 series cover a wide range of protection classes, connection types, and technical requirements – from IP40 to IP67, shielded or unshielded, field-wireable or moulded. These rugged and flexible connector types are ideal for compact applications in industrial automation, medical technology, and test and measurement equipment.
The Allen‑Bradley Stratix 2100 Unmanaged Industrial Ethernet Switch reduces the complexity of network deployments and delivery with its simple dip-switch settings and easy-to-install functionality. This small form-factor device improves network reliability that best meets overall network system design and application requirements. End users will also benefit from reduced training needs, improved first time fix rates, and lower maintenance costs from the Stratix 2100.
Phoenix Contact introduces intrinsic safety versions of the MINI Analog Pro Ex signal conditioners, featuring both energy-limiting and functional safety in a compact package. With these new signal conditioners, process engineers can isolate, convert, filter, and amplify signals in the most hazardous areas. All of the intrinsic safety (Ex i) signal conditioners in the MINI Analog Pro family are certified for applications up to SIL 3 1oo1 (one out of one). The MINI Analog Pro Ex modules have international Ex approvals, making them suitable for hazardous locations worldwide.
Weidmuller USA has recently introduced a new unmanaged Single Pair Ethernet (SPE) Switch that enables a seamless networking experience for users in a wide array of industrial environments. Featuring four 10-Base T1L ports with PoDL (up to Class 14), the SPE switch from Weidmuller delivers power and data over a single twisted pair, thereby reducing cabling complexity. A single 10/100 Mbps RJ45 port ensures easy integration with existing networks, and this SPE switch was designed for reliable forwarding of data packets in automation technology for distances up to 1,000 meters.
RS offers Festo’s extensive portfolio of process automation products for industrial fluid process control applications, spanning core components, like process and piloting valves, to smart solutions, like remote I/O systems. Fluid process control is vital to virtually every industrial market segment, including food and beverage, water and wastewater, pharmaceutical, oil and gas, and chemical. Automating the movement of fluids, including liquids, gases, and even granulated solids, eliminates the requirement for manual operation and the associated risk of human error. It also improves process efficiency, safety, productivity, profitability, and product quality.
Banner’s cost-efficient K50 Programmable Indicators, Touch Buttons, and Touchless Buttons are now available with IO-Link and Modbus—alongside existing discrete models—bringing intuitive feedback that guides action, confirms progress, and improves response time to an expanded range of applications. IO-Link makes device replacement straightforward and provides access to valuable process data, while Modbus—using Banner’s PICK-IQ protocol—enables faster, more efficient communication for pick-to-light systems and operator guidance in assembly and fulfillment applications.
Mersen is excited to announce it’s new Class J Fused Switch. Mersen’s FS Series UL 98 Listed fused disconnect switch is designed for branch circuit protection using any UL Listed Class J fuse. Engineered for performance and convenience, the FS Series delivers the high interrupting capacity of Class J fuses (200kA SCCR) in the same footprint of a fuse holder.
The new BTC22 and BTC24 box thin clients from Pepperl+Fuchs are specially developed for a continuous 24/7 operation in control rooms and laboratories. These rugged and compact devices provide the high reliability and long-term availability that is essential for demanding industrial environments. With its powerful hardware, the BTC24 supports up to four 4K displays, while…
Same Sky’s Motion and Control Group has recently announced the addition of a new series to its innovative AMT absolute encoder family designed to support larger motor shaft sizes from 9 mm to 15.875 mm (5/8 inch). The AMT25 series, based on Same Sky’s proprietary capacitive ASIC technology, brings the same high levels of durability, accuracy, and immunity to environmental particulates as current AMT encoder models. Outputting 12 bits or 14 bits of absolute position information with single-turn or multi-turn output options, the AMT25 utilizes full duplex Serial Peripheral Interface (SPI) communication for high accuracy position data.
The New IO-Link Converter IOC 074 brings analog sensors into the digital age by converting up to three 4–20 mA signals into the IO-Link protocol. It’s an ideal solution for retrofitting legacy systems and enabling modern, forward-compatible automation infrastructures. Built for tough industrial environments, the IOC 074 features a compact stainless steel housing, IP65–IP67 protection, and a convenient clip-mounting system – all designed with easy installation in mind.
Quality is crucial when it comes to DIN rail enclosures because the cost of failure can be disproportionately high. Yes, DIN rail enclosures are commonplace – so much so that you could be forgiven for getting a bit blasé when specifying them – but quality will always matter in the end. If a poor-quality DIN rail enclosure in a control panel were to fail, the consequences could be expensive – especially if it were to trigger a safety alert that shuts down production. The resulting costs do not bear thinking about.
AutomationDirect has added Ashcroft B-Series mechanical pressure switches to deliver precise, reliable pressure sensing in a compact and rugged design. Equipped with cost-effective, high-capacity 15A relay outputs, they eliminate the need for external contactors or interposing relays. Select models feature a narrow deadband for highly accurate trip points. With adjustable setpoints, wide pressure ranges up to 3000 psig, versatile wall and conduit mounting options, durable epoxy-coated aluminum housings, and NEMA 4X/IP66 ratings, these switches are built for demanding industrial, process, and outdoor applications.
Rockwell Automation, Inc. has recently announced the global launch of OptixEdge, an innovative edge gateway solution that revolutionizes data processing for industrial customers. Today’s smart machines are generating more data than ever, but according to Rockwell’s latest State of Smart Manufacturing Report, only 44% of data is being used effectively. Many companies face challenges that prevent them from utilizing a vast amount of their data, such as network limitations, security concerns, or storage costs. Traditionally, data is sent to distant cloud servers to be processed, but this can be expensive and inefficient.