|

Arc-Flash Relay Increases Electrical Safety in Machine Tool Manufacturing

December 11, 2024

Pietro Carnaghi Company Finds Success with Littelfuse AF0500 Arc-Flash Relay

Introduction

Pietro Carnaghi SpA, an Italian company, has been designing and manufacturing machine tools for over 100 years. With around 1,500 machines installed globally, they are an industry leader in the production of high-precision, heavy-duty hydrostatic vertical turning and milling centers, movable portal milling machines (gantry), flexible manufacturing cell systems, and multi-tasking machines (Flexturn) that provide innovative, high-performance, and customized solutions.

Pietro Carnaghi’s machines are used in the fields of defense, energy (machining of gas, steam and hydro-electrical turbines, nuclear energy and renewable energy), jet engines, aerospace, mining equipment and earthmoving, bearings and general mechanics.

Application

For one of the company’s recent projects for a U.S. customer, Pietro Carnaghi asked its consultant firm, AC&E, to certify that a machine was in compliance with a new NFPA 70 rule. Recent updates to NFPA 70 National Electrical Code (NEC) 240.87 include a requirement for an arc-energy reduction system where the overcurrent protection device installed in a circuit breaker is rated at 1,200 A or higher.

There are different methods allowed by NEC to meet this requirement for reducing arc energy — one of these is the use of an energy-reducing active arc-flash mitigation system. In order to be fully compliant with this new requirement, Pietro Carnaghi contacted Littelfuse to inquire about an arc-flash relay as a possible solution.

Upon inspection at the production facility, the electrical cabinet that equipped the machine was two-sided: 6 m in length on each side, with the power system on the front side, with a main breaker of 1,200 A, and all the variable speed drive systems to control the motors on the back side.

The team agreed that the Littelfuse AF0500 arc-flash relay, with its superior arc-fault detection
technology and fast opening time, would be the best option to comply with the NEC requirements.
They decided to use one AF0500 relay with 3 light sensors (PGA-LS10) to protect the front side of the
electrical cabinet and one fiber-optic sensor (PGA-LS20), 8 m in length, to protect the dc bus powering
the variable speed drive system.

Outcome

Pietro Carnaghi and AC&E were very impressed with the fast reaction time of the AF0500, which in combination with the circuit breaker, have been able to clear an arc-fault (simulated with a professional flash lamp) in less than 10 ms. They also expressed their satisfaction for having the electrical cabinet fully compliant with the NPFA 70 rule for arc-energy reduction.

“The Littelfuse AF0500 met our needs for arc-flash control of the UL electrical panel,” stated Roberto Porro, Electrical Engineering Manager. “We are very satisfied with the outcome of the test carried out by the certifying body, which had a positive result and guarantees that we will have a satisfied endcustomer.” Porro went on to say that the “manual was easy to understand for use of the control unit and the sensors.”

In conclusion, he stated that they would like to stay updated on new Littelfuse products in order to integrate them into their applications.

Important_Links_Bar.jpg

https://info.littelfuse.com/hubfs/IBU%20-%20Temp%20Folder%20Pre%20Site%20Launch%20-%202024/IBU%20-%20Success%20Story-Pietro%20Carnaghi%20Arc-Flash%20Relay%20AF0500%20111924.pdf?utm_campaign=IBU%20-%20Success%20Stories%202024&utm_medium=email&_hsmi=337882083&utm_content=333798390&utm_source=hs_email

Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More


Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.


Products for Panel Builders

  • Hammond Manufacturing: NWM Series Swing-Out Outdoor Wall Mount Rack Cabinet

    Hammond Manufacturing: NWM Series Swing-Out Outdoor Wall Mount Rack Cabinet

    The NWM Series Swing-Out Outdoor Rack Cabinets by Hammond are designed for mounting 19-inch rack and panel-mounted devices, offering both front and rear access through a three-part design: door, middle section, and back pan. These cabinets provide protection against water, dirt, and other contaminants, making them suitable for environments where space is limited and wall… Read More…

  • Littelfuse: KSC2 DCT Switches with 3.5mm Actuator Optimize Compact Designs

    Littelfuse: KSC2 DCT Switches with 3.5mm Actuator Optimize Compact Designs

    Littelfuse, Inc. recently announced the C&K Switches KSC2 KSC Dual Circuit Technology (DCT) Series Tactile Switches. The latest addition to its innovative tactile switch series offers a 3.5 mm actuator height, lower than the KSC4 DCT with its 5.2 mm actuator height. Combined with single pole double throw (SPDT) functionality and the Electrical Height specification, the KSC2… Read More…