LUTZE: AirSTREAM Compact
AutomationDirect offers 300V UL Instrumentation Cable available with 16 AWG, 18 AWG or 20 AWG conductors in 1, 2, 4, or 8 twisted pairs with an overall shield or in 2, 4, or 8 individually shielded twisted pairs with an overall shield. The overall shielded cables have an aluminum/polyester foil shield with 100% coverage and a tinned copper continuous drain wire for protection against external electrical noise interference.
Stewart Connector, a Bel group company, recently announced a new line of IP67 rated USB Type-A Cable Assemblies. Designed for use in IoT applications where reliability and functionality are necessary and USB connections are needed outside of typical office applications, these cable assemblies can be used in multiple applications, including industrial automation, medical devices, military applications, and other harsh environments.
The KEL-DPU-OD is ideally suited for applications in which cable entry components are permanently exposed to strong UV radiation, weathering and temperature fluctuations. Compared to standard versions, it offers increased material resistance and extended service life in outdoor environments. Thanks to its approvals, it is particularly suitable for the use in photovoltaic systems (UL 6703, UL 6703A, UL 3703, UL 1703).
Siemens has launched a new generation of machine-level block I/O devices in the form of the Simatic ET 200eco PN. The new I/O family with IP65/67 degree of protection includes five digital I/O devices as well as an IO-Link master device and offers users a whole range of new functions for modern machine concepts and requirements. In their new industrial metal enclosure, the devices are reliably protected from UV radiation and harmful substances even under adverse environmental conditions, making it possible to use the devices outside of factory buildings.
(Wuppertal) The Schmersal Group has further developed its compact RSS260 safety sensor and equipped it with new software – the sensor now offers four additional, optionally selectable functions: – Feedback loop monitoring – Automatic restart / manual restart – Reset – Emergency stop monitoring. On the F0/F1 version, the RSS260 assumes the tasks of a safety relay module, i.e. monitoring of the movable safety guard as well as of the contactors directly actuated by the sensor outputs.
The CCSSTR2025-X Stainless Steel Trefoil Cable Cleat offers protection against extreme environments and high short circuit current faults. The cable cleat is certified to IEC 61914:2015, tested up to 172kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 20-25mm and installs using a separately sold mounting bracket or direct to the cable tray rung via fixing hole and user-supplied M8 bolt. Features 316L SS and removable spacer.

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.
Learn more HERE.

Motivair by Schneider Electric has recently introduced a new 2.5MW Coolant Distribution Unit (CDU) designed to cool high-density data centers reliably, at scale. The MCDU-70 is the highest-capacity CDU available from Motivair, and presents a breakthrough flexible and scalable solution for meeting the rigorous demands of next-generation GPUs (Graphics Processing Unit) and gigawatt-scale AI Factories. Utilizing… Read More…

Omron Automation has recently released the DX100 Data Flow Edge Device, an industrial edge solution designed to connect directly to existing PLCs, sensors, and other automation devices. DX100 enables manufacturers to securely connects, collects, formats, and shares data intuitively. Without modifying current control logic or requiring extensive programming experience. DX100 is a single, industrial data… Read More…