| | | |

RJ45 Magnetic Modules from Daburn Meet Ethernet Requirements

June 3, 2021

The RJ45 jack and connector modules from Daburn integrate magnetics to protect against electromagnetic interference (EMI) and common mode signals, satisfying various data transmission requirements such as Power over Ethernet (PoE) networks, PHY IC 10Base, 10/100Base, 1000Base (1G) and 10G. This product family is comprised of three series:

  • 12F/14F-1X Series. This 10BASE-T RJ45 jack and magnetic module’s integrated filter is the same size as the RJ45 connector, saving PCB space while reducing EMI radiation and improving EMI performance.
  • 13F/6X Series. Designed for 100BASE-T transmission over UTP-5 cable, this RJ45 jack and magnetic module series offers designs to support every PHY, and it meets or exceeds IEEE 802.3 and ANSI X.3263 standards.
  • 13F-67 Series (PoE and PoE+). This version of the 13F/6X Series is designed to provide the higher current and isolation required for PoE applications.

By using an RJ45 connector with integrated magnetics, engineers can lower component count, create a simpler PCB layout, save board space and reduce power consumption. Applications for Daburn RJ45 integrated connector modules include routers, switches, VDSL digital equipment, network set-top boxes and other home and commercial devices.

More Information

Post Views: 455

Related Articles

Durability And Ruggedness Of Expanded Beam Optics Using Springless Mating And Crimpless Cable Retention

Durability And Ruggedness Of Expanded Beam Optics Using Springless Mating And Crimpless Cable Retention

TE Connectivity (TE) is releasing its EB16 expanded beam optical pin and socket termini in new single mode and multimode variations. Both variations are based on an updated design that includes springless mating and crimpless cable retention. EB16 termini are built on TE’s PRO BEAM expanded beam connector technology, which expands and collimates the optical signal into a beam size well beyond its original size to help provide easier optical alignment, low sensitivity to contamination and consistent performance over thermal changes.

 

 

 

Teledyne FLIR Introduces Neutrino SX8 Mid-Wavelength Infrared Camera Module and Four Neutrino IS Series Models with Integrated Continuous Zoom Lenses
| |

Teledyne FLIR Introduces Neutrino SX8 Mid-Wavelength Infrared Camera Module and Four Neutrino IS Series Models with Integrated Continuous Zoom Lenses

Teledyne FLIR, part of Teledyne Technologies Incorporated (NYSE:TDY), recently introduced the Neutrino SX8 mid-wavelength infrared (MWIR) camera module and four additional Neutrino IS Series models designed for integrated solutions requiring HD MWIR imagery with size, weight, power, and cost (SWaP+C) constraints for commercial, industrial, defense original equipment manufacturers (OEM), and system integrators.

 

 

 

Mencom Introduces Single Cover Low-profile Housing for Panel Interface Connectors
| | | | | | | | |

Mencom Introduces Single Cover Low-profile Housing for Panel Interface Connectors

Mencom has announced the release of their new ‘stainless steel’ version for the single cover low-profile housing. This stainless-steel housing is corrosion resistant, so it provides the utmost protection against most acids, alkaline solutions, and chlorine-bearing environments.

Toshiba: Type1 Light – Standard Sequence Control Module

Toshiba: Type1 Light – Standard Sequence Control Module

The Type1 Light S CPU mounts in a standard V2000 I/O rack (3 I/O, 5 I/O or 8 I/O racks are available). It can replace a S2E module. The Type1 Light S does not support racks with station bus, or I/O modules that require a station bus. The Type1 Light S CPU has both a RS485 port and an Ethernet port which supports Toshiba’s ASCII computer link protocol. This allows connection by any HMI or SCADA software that has the Toshiba computer link driver.

 

 

 

icotek: EMC-KEL-DS – Split EMC Cable Entry Frames for Shielding Cables With Connectors / IP55
| |

icotek: EMC-KEL-DS – Split EMC Cable Entry Frames for Shielding Cables With Connectors / IP55

The EMC cable entry frame EMC-KEL-DS has been metallised (galvanise coated) to create a conductive surface. The front cable grommet (KT) is used for strain relief and cable sealing on the cable jacket. The cable shield is contacted over 360° via the rear conductive grommet (EMC-KT). The EMC-KEL-DS frames match exactly the cut-out dimensions for 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed.

 

 

 

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • AutomationDirect: New Endress+Hauser Ceraphant Series Digital Pressure Sensors

    AutomationDirect: New Endress+Hauser Ceraphant Series Digital Pressure Sensors

    AutomationDirect has added Endress+Hauser Ceraphant series digital pressure transmitters featuring a compact stainless steel construction, a 4-digit LCD display, and IO-Link compatibility for easy setup, integration, and on-the-fly configuration changes. Ceraphant PTP31B series digital pressure transmitters offer dual 1/2” NPT male / 1/4” NPT female process connections and are available in measuring ranges up to… Read More…

  • AutomationDirect: Murr Elektronik Open Core Control Transformers

    AutomationDirect: Murr Elektronik Open Core Control Transformers

    AutomationDirect has added Murrelektronik open core control transformers that provide a flexible solution for stepping down a variety of primary voltages ranging from 208 to 550 VAC. The universal input on these transformers provides eleven different voltage options that are easily configurable using simple quick-connect jumpers. The primary side can be configured for 208, 230,… Read More…