AutomationDirect Adds ProSense Advanced Process Controllers

April 23, 2020

Made exclusively for AutomationDirect by Yokogawa, ProSense® PPC5 series advanced process controllers handle temperature, pressure, level, flow, and other process variable control applications and offer a variety of control, input, output, alarm and communications options.

These 1/4 DIN controllers accept inputs directly from thermocouple, RTD, and analog mA, mV, V signals. Remote setpoint and contact input options are available.

Control outputs include relay, voltage pulse, or linear current. An analog output to represent the PV, SP, target SP, remote SP, or output signal is available. Three alarm contact outputs can be configured for 30 alarm types and 10 alarm functions.

Control modes include single loop, loop control with PV hold, and cascade. Control types available are PID, On/Off, batch PID and manual control. PPC5 series controllers are available with no communications or with RS-485 Modbus ASCII/RTU, or Ethernet+RS-485 gateway Modbus TCP/IP communication options.

Priced from $325.00, ProSense PPC5 controllers are configured with the keypad/display or free downloadable configuration software is available. ProSense advanced process controllers are UL, CSA, CE approved and have a 3-year warranty.

Important Links Bar.jpg

www.automationdirect.com/process-controllers

 

Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More


Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.


Products for Panel Builders

  • icotek: Expansion of the KEL-DPZ-KX/KL Cable Entry Plate Series 

    icotek: Expansion of the KEL-DPZ-KX/KL Cable Entry Plate Series 

    KEL-DPZ cable entry plates are designed to route and seal a large number cables without connectors, hoses or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space. The KEL-DPZ products are a cost and time saving alternative to traditional cable glands. The KEL-DPZ-KX/KL (IP65) size was created especially for Rittal KL/KX… Read More…

  • Pilz: PNOZ m ES 16DI PNOZmulti 2 Small Controller Input Module

    Pilz: PNOZ m ES 16DI PNOZmulti 2 Small Controller Input Module

    Have you selected the appropriate base unit for your application? Various expansion modules can be docked to a PNOZmulti 2 base unit, depending on the requirement: For example: I/O modules, motion monitoring modules and link modules. To monitor pushbuttons and other digital sensors, you can use the input module PNOZ m ES 16DI for standard applications. Configurable in the software… Read More…