| | | |

Grace Showcases Safe-Test Point PESD at Rockwell Automation Fair

Grace Safe-Test Point

 November 20, 2019

Grace Safe-Test Point Permanent Electrical Safety Device


Indicating the presence and absence of voltage, the Safe-Test PointTM from Grace Engineered Products allows workers to a safer way to perform Absence of Voltage Test (AVT) from outside the electrical cabinet. By following proper safety procedures, the risks of arc flash or shock hazard is reduced. The Safe-Test Point provides a safer and more productive method of performing lockout/tagout (LOTO), while exceeding NFPA 70E and meeting OHSA energy isolation principle.

The voltage values will read with a percentage of error that varies depending on the ratings and series of the multimeter. For example, when measuring voltage on 480VAC system Phase L1 to Phase L2, the 10MΩ multimeter voltage value will have a -2% reduction reading approximately 470V.

The Safe-Test Point contains four test point jacks that are hardwired directly to energy sources and allows measurement of both AC and DC voltages by inserting the insulated meter probes into any two test point jacks to take a voltage reading.

A Safe-Test Point can be mounted on the side of an enclosure, door, or flange. By inserting insulated meter probes with .080” tips into any two test point jacks, you can take a voltage reading with properly rated test equipment.


  • Allows workers to perform Absence of Voltage Tests from outside an electrical cabine
  • Reduce risks of an arc flash or shock hazard 
  • Provides four test point jacks to allow measurement of AC/DC voltages either phase to phase or phase to ground
  • Can be mounted on the side of the enclosure, door or flange
  • Comes complete with a tool-entry dust cap and label


More information on the Safe-Test Point PESD

Safe-Test Point datasheet



Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders