DRC Series DIN Rail AC/DC Power Supplies

October 14, 2020

XP Power expands its range of DIN rail AC/DC power supplies with the DRC30, DRC60, and DRC100. These competitively priced, lightweight, compact units have a low-profile case of a similar profile to that of circuit breakers, allowing them to fit in consumer unit style housings or control panel installations. The standard width cases allow direct substitution with other similar products. The DRC series power supplies are ideal for escalator/travellator/elevator/lift controls, building heating/aircon monitoring, control and security systems, factory automation, and machine and process control applications.

The 30 W DRC30 and 60 W DRC60 have a choice of five DC outputs: 5 V, 12 V, 15 V, 24 V, and 48 V. The 100 W DRC100 has a choice of four DC outputs: 12 V, 15 V, 24 V, and 48 V. An output adjustment screw is provided on the front of each device (see models and ratings tables for adjustment range).

There is no minimum load requirement; the no-load input power is 0.3 W to 0.4 W depending on the model. A DC OK LED provides a clear indication of an active DC output. All models feature internally fused input protection, overvoltage, overload, and short circuit protection. The input to output isolation is 4 kVAC. All models are class II and have an input range of 85 VAC to 264 VAC with derating below 100 VAC or 120 VDC to 370 VDC with derating below 140 VDC

EMC standards include EN55032 Class B for conducted and radiated emissions; EN61000-4-2, 3, 4, 5, 6 for EMC immunity; safety approvals include UL62368-1 and TUV EN62368-1. The operating temperature range is -30°C to +70°C with full power available from -10°C to +45°C/+50°C (see data sheet temperature derating graphs). The MTBF is greater than 300 khrs (MIL-HDBK-217F, +25°C GB) with an operating altitude of 2000 m.

The DRC power supplies are housed in lightweight black plastic UL94V-0 rated cases with a snap-on DIN rail (TS35/7.5 or TS35/15) mounting with a spring-loaded release catch. Connection is via screw cage clamp terminals wire gauge 12 AWG to 24 AWG. The DRC30 measures 3.65 inch x 1.38 inch x 2.28 inch (92.7 mm x 35.0 mm x 58.0 mm) with a weight of 115 g. The DRC60 measures 3.65 inch x 2.05 inch x 2.28 inch (92.7 mm x 52.0 mm x 58.0 mm) and weighs 175 g. The DRC100 measures 3.65 inch x 2.76 inch x 2.28 inch (92.7 mm x 70.0 mm x 58.0 mm) with a weight of 235 g.

Key Features-Benefits Bar.jpg


  •    –   Very low cost
  •    –   30 W, 60 W, 100 W convection cooled
  •    –   Compact, low profile, DIN rail mount case
  •    –   UL/EN62368-1 approvals
  •    –   Class II operation
  •    –   Class B conducted and radiated emissions
  •    –   Input voltage range 85 VAC to 264 VAC, 120 VDC to 370 VDC
  •    –   Output voltages from 5 VDC to 48 VDC
  •    –   High efficiency, up to 91%
  •    –   4 kVAC input to output isolation
  •    –   Input surge withstand 300 VAC for 5 s
  •    –   Output voltage adjustment
  •    –   DC ON LED indicator
  •    –   -30°C to +70°C operating temperature
  •    –   Full power to +45°C/+50°C
  •    –   3-year warranty

Important Links Bar.jpg


Check Availability – DRC30 – DRC60 – DRC100


Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • Panduit: G6 PDU Series Boosts Panduit PDU Offerings

    Panduit: G6 PDU Series Boosts Panduit PDU Offerings

    Panduit is pleased to announce the global release of its G6 PDU Series. The innovative G6 line marries the best-in-class form factor of the G5 Series with an upgraded intelligence card to bring faster performance along with new functions and cybersecurity improvements to customers. Among the main features of the G6 PDU is its low-profile… Read More…

  • Russelectric, A Siemens Business: ATS Remote Annunciator

    Russelectric, A Siemens Business: ATS Remote Annunciator

    Russelectric, A Siemens Business, introduces its new ATS Remote Annunciator (RTS-RA), a powerful accessory that brings together data from multiple Automatic Transfer Switches into a single display. The remote annunciator is designed to be configured by the customer. It allows monitoring of the position and status of up to eight Russelectric ATS types RTSCD and… Read More…