| | | | |

EC Centrifugal Fans from ebm-papst Offers More Power and Efficiency

December 13, 2021  

With the new RadiPac series, ebm-papst has enhanced its centrifugal fan offering. The latest generation of RadiPac fans operate at considerably higher efficiency levels. Higher speeds ensure greater air flow and higher pressures, enabling even high-pressure applications to be covered. 

The impeller developed according to the latest aerodynamic findings means that flow losses are drastically reduced and noise generation is decreased further. Depending on the operating point, this is between 3 and 7 dB(A) lower than those of the previous series. A high-strength, glass-fiber reinforced composite material was used, enabling a complex shape and ensuring the impeller’s stability. 

The EC motors integrated into the fans in the power range from 500 W to 8 kW achieve efficiency levels in accordance with the requirements for efficiency class IE5 set in IEC/TS 60034-30-2. The new 8 kW drive sets high standards in terms of its high-performance electronics and more compact dimensions. It has been expanded to include a configurable interface, including a MODBUS RTU interface and an integrated resonance sensor. This resonance sensor measures oscillations and vibrations and reports disturbances before the fan is damaged – truly in the spirit of GreenIntelligence. 

In order to suit different installation situations, the new RadiPacs are available in a standard and short version. Both versions are available as a motor-impeller combination or as a ready-to-install plug & play solution in a sturdy support bracket for easy wall mounting. As an option, there is a completely enclosed FlowGrid air inlet grille that reduces noise-generating turbulence in the inflow and also functions as a guard grill. Retrofitting is generally possible in the application without any modifications to the design, as the new fans are geometrically smaller despite higher power in the same design size. Sizes 310 to 630 with air performance of up to 20,000 m³/h and a static pressure increase of well over 2,000 Pa will be available from October 2021. Sampling is possible on request as of now. 

 

  • New impeller: more efficient and quieter
  • GreenTech EC motors from 500 W to 8 kW with configurable control interface for analog and digital signals
  • Flexible options and suitable for retrofitting
  • Sizes 310 to 630 as a motor-impeller combination and ready-to-install plug & play support frame construction
  • Volume flow up to 20,000 m³ / h and pressures over 2,000 Pa
  • All versions are also available as a compact short version

 

More Information

Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More


Sponsored Content
Explore the Benefits of Industrial Control Panel Certification

The growth of industrial machinery and automation is driving a growing need for industrial control panels (ICPs) globally. The UL 508A Industrial Control Panel Shop Program is part of UL’s General Coverage Program, which offers control panel manufacturers flexibility in applying UL Certification Marks to a wide range of industrial control panel designs. Our Industrial Control Panel Program covers multiple requirements like proper component usage, enclosure environmental ratings, wiring and motor protection, safety markings, and conformance to the National Electric Code® (NEC) and Canadian Electrical Code (CEC).

Learn more HERE.


Products for Panel Builders