| |

Rockwell Automation: PowerFlex 755TL/755TR Drives Integrated into CENTERLINE 2500 MCCs

PBUS-42-Rockwell-PowerFlex755TL-400.jpg

July 29, 2022

Rockwell Automation has incorporated two more PowerFlex variable frequency drives (VFDs) into CENTERLINE 2500 low-voltage motor control centers (MCCs) to help industrial operators in global IEC markets improve their production, safety and energy performance.

The PowerFlex 755TL and 755TR drives with TotalFORCE technology can be integrated into CENTERLINE MCCs. The VFDs deliver real-time operating system performance data that can help operators boost their factory output, uptime and energy savings.

  •    –   The PowerFlex 755TL drive provides built-in harmonic mitigation and power-factor correction through active front-end technology. By reducing the adverse effects of harmonic distortion, the VFD improves motor efficiency, reduces energy costs and minimizes power-distribution issues on the factory floor.
  •    –   The PowerFlex 755TR drives can help reduce energy consumption by using built-in regeneration to deliver energy back to the incoming power supply. This is more energy efficient than using resistive or mechanical braking. Plus, it eliminates the need for braking resistors and cooling equipment, which can reduce wiring, labor, installation, and maintenance costs.

By integrating PowerFlex 755TL or 755TR drives with a CENTERLINE 2500 MCC, operators also receive real-time predictive diagnostics and maintenance alerts that can reduce unplanned downtime. Plus, plant operations get certified safety benefits from ArcShield technology that provides arc-fault containment per IEC TR 61641:2014.

With CENTERLINE MCC manufacturing facilities on three continents, factory-ready low-voltage motor control and power-management system technology is available in IEC markets around the world.

Important_Links_Bar.jpg

https://ir.rockwellautomation.com/press-releases/press-releases-details/2022/Rockwell-Automation-Integrates-Energy-Saving-Drives-with-Global-Motor-Control-Center/default.aspx

 

Post Views: 825

Related Articles

Bel Fuse-Circuit Protection Announces 0ABA Series of Surface Mount Fast-Acting Chip Fuses

Bel Fuse-Circuit Protection Announces 0ABA Series of Surface Mount Fast-Acting Chip Fuses

Bel Fuse-Circuit Protection, a Bel group company and premier global manufacturer of fuses, announces their 0ABA Series of small 0402 surface mount fast-acting chip fuses. These fast blow fuses are designed for handling excessive current and set the industry standard for performance, reliability and quality.

 

 

 

PB 25 Rockwell newlogo 400
| |

Batch Management Software: Upgrade for Flexibility and Uptime

Consumers want variety – and they want it now. A stroll down the aisles of the grocery store is all it takes to realize just how many choices are becoming available, from snacks and beverages to shampoos and medications. With tight competition and a demanding market, the need for manufacturers to provide a wide array of choices is here to stay. Not only is variety the spice of life – but it’s becoming mandatory to stay competitive.

 

 

 

Mitsubishi Electric Automation Releases Cost-Effective Industrial Robot
| | | | |

Mitsubishi Electric Automation Releases Cost-Effective Industrial Robot

Mitsubishi Electric Automation, Inc. has recently announced the release of its RV-8CRL industrial robot, which offers a high-quality solution at a lower price point, while not sacrificing on performance. Due to its smaller base size, expanded effective working area, and compatibility with safety intelligence components, RV-8CRL is extremely versatile in its applications, including pick and place, inspection, and general assembly.

 

 

 

PBUS-42-Emerson-NelsonDigitalControllers-400.jpg
| |

Emerson: Nelson Microprocessor-based Digital Controllers

Emerson is offering a low-cost upgrade for electrical heat tracing systems with its Nelson AXPC100-CM-GP and CM-GP microprocessor-based digital controllers that are engineered to accurately control, monitor and maintain the process temperatures of industrial pipes or tanks in ordinary (non-hazardous) locations. Ideal for replacing aging electro-mechanical thermostats, the controllers achieve cost savings by eliminating the need for several components.

 

 

 

PBUS-25-Rockwell-Stratix5800Switch-400.jpg
| | | |

Rockwell Automation Prepares Plant Networks for Future Demands with New Managed Switch

Companies can prepare their production facilities for more demanding, data-intensive networking with the new high-performance, all-gigabit Allen-Bradley Stratix 5800 managed industrial Ethernet switch . The switch supports layer 2 access switching and layer 3 routing for use in multiple layers of the architecture. Robust security capabilities and ISA/IEC 62443-4-2 certification help enhance network security.

 

 

 

icotek: EMC-KEL-DS – Split EMC Cable Entry Frames for Shielding Cables With Connectors / IP55
| |

icotek: EMC-KEL-DS – Split EMC Cable Entry Frames for Shielding Cables With Connectors / IP55

The EMC cable entry frame EMC-KEL-DS has been metallised (galvanise coated) to create a conductive surface. The front cable grommet (KT) is used for strain relief and cable sealing on the cable jacket. The cable shield is contacted over 360° via the rear conductive grommet (EMC-KT). The EMC-KEL-DS frames match exactly the cut-out dimensions for 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed.

 

 

 

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • Hammond Manufacturing: NWM Series Swing-Out Outdoor Wall Mount Rack Cabinet

    Hammond Manufacturing: NWM Series Swing-Out Outdoor Wall Mount Rack Cabinet

    The NWM Series Swing-Out Outdoor Rack Cabinets by Hammond are designed for mounting 19-inch rack and panel-mounted devices, offering both front and rear access through a three-part design: door, middle section, and back pan. These cabinets provide protection against water, dirt, and other contaminants, making them suitable for environments where space is limited and wall… Read More…

  • Littelfuse: KSC2 DCT Switches with 3.5mm Actuator Optimize Compact Designs

    Littelfuse: KSC2 DCT Switches with 3.5mm Actuator Optimize Compact Designs

    Littelfuse, Inc. recently announced the C&K Switches KSC2 KSC Dual Circuit Technology (DCT) Series Tactile Switches. The latest addition to its innovative tactile switch series offers a 3.5 mm actuator height, lower than the KSC4 DCT with its 5.2 mm actuator height. Combined with single pole double throw (SPDT) functionality and the Electrical Height specification, the KSC2… Read More…