Thermocouple Extension Wire and Cable from AutomationDirect

April 16, 2020

Extension cable for both Type K and Type J thermocouples is available with either an overall shield (OS) or with individually shielded pairs with an overall shield (SPOS). These cables allow the connection of multiple field sensors to operating instrumentation or PLC input cards with one run versus having to install multiple extension wires.

The 20AWG thermocouple extension cable is available in 2, 4, and 8 twisted pairs. Alphanumeric print on the twisted pairs makes identifying the pairs for installation and troubleshooting easy.

The thermocouple extension cable is UL PLTC rated. PLTC cable (Power Limited Tray Cable) is rated at 105°C, 300V and is approved for use in Class I, Division 2 Hazardous Locations.

AutomationDirect’s UL approved thermocouple extension wire and cable starts at $0.87 per foot and is cut to length in 1-foot increments with a low 20-foot minimum length.

Important Links Bar.jpg

www.automationdirect.com/thermocouple-ext-wire

 

Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More


Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.


Products for Panel Builders

  • Siemens: NEMA 30mm Pushbuttons

    Siemens: NEMA 30mm Pushbuttons

    The Siemens family of 30mm pilot devices and pushbuttons are designed to stand up to the punishing water, dust and oil environments of American manufacturing, offering three classes of sophistication: Sleek 30mm designed pushbuttons, Standard duty control stations, hazardous location pilot devices, oiltight pilot devices, and break glass emergency stations. Read More…

  • icotek: Expansion of the KEL-DPZ-KX/KL Cable Entry Plate Series 

    icotek: Expansion of the KEL-DPZ-KX/KL Cable Entry Plate Series 

    KEL-DPZ cable entry plates are designed to route and seal a large number cables without connectors, hoses or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space. The KEL-DPZ products are a cost and time saving alternative to traditional cable glands. The KEL-DPZ-KX/KL (IP65) size was created especially for Rittal KL/KX… Read More…