SCHURTER now offers DIN-Rail mount adaptor kits with metal clips to provide a simple solution for converting panel mount block filters to DIN-Rail mount for use inside control cabinets.
Ethernet expandable I/O modules from Acromag now offer field-selectable EtherNet/IP or Modbus TCP/IP networking protocol.
Dinkle International announces the DP2.5SG sensor/actuator terminal block family, providing adaptable cable connectivity options for a variety of automation needs. A modular design based around DP2.5SG terminal blocks—single-level pass-through type mountable on a standard DIN rail—provides flexible installation options for a variety of applications. Additional components are available to add easily recognizable color-coded distribution of positive (red) and negative (blue) power, and ground earth potential (green/yellow) connections as needed.
AutomationDirect has added the DURApulse GS10 series as their newest and most affordable line of micro AC drives. GS10 drives are available in a variety of voltage and horsepower ratings, including single-phase 120VAC models in sizes from ¼ to 1 hp, single-phase 230VAC models from ¼ to 3hp, three-phase 230VAC models from ¼ to 7.5 hp, and 460VAC three-phase units from ½ to 10 hp.
Teledyne FLIR, part of Teledyne Technologies Incorporated, today announced the expansion of its Si124 industrial acoustic imaging family of cameras by introducing a new set of sound imaging cameras that feature a wider acoustic detection range, up to 65Khz, and an integrated battery with a quick start power button to make condition monitoring and inspection more efficient and effective.
The three existing PS power supply series from Beckhoff have been expanded to include new devices with a built-in EtherCAT interface within the PS2000 series. They make it easy to gather additional measurement and device data for comprehensive system monitoring, which can be used to increase availability and reduce downtime. As a result, the power supplies combine compact design and high performance with predictive maintenance functionality for the first time.
CUI Devices’ Interconnect Group has recently announced the introduction of circular cable assemblies to its cable assemblies portfolio. Available in M12 connector types, CUI Devices’ CDM12 family offers a range of male or female plug versions and contact position options of 3, 4, 5, 8, and 12 pins. These M12 cables are A coded to support 1 Gbit Ethernet and carry IP67 ratings to deal with harsh environments found in industrial and factory automation applications.
Yaskawa America, Inc., Drives and Motion Division, announces the newest addition to the industrial AC drive family, the FP605 Industrial Fan and Pump Drive.
DENIOS Lithium-Ion Battery Charging and Storage Units are designed for contractors and others who are incorporating lithium ion batteries into their work.
Teledyne FLIR, part of Teledyne Technologies Incorporated, today introduced the FlexView dual field-of-view (DFOV) lens attachment for FLIR Axxx and Txxx Series thermography cameras designed to improve operational efficiency, safety, and accuracy from switchyards to the plant floor. With a single form factor just 6mm longer than the standard single-lens setup, operators now can have two lenses without adding weight while enjoying a smoother experience operating the camera and reducing inspection time in the field.
AutomationDirect has added a new line of enclosure filter fans to their inventory of thermal management devices. The Fandis Virdis series filter fans provide a low-cost thermal management solution for applications where the surrounding cooler air can be used to reduce the internal temperature of an enclosure. The Virdis series fans are available in both NEMA 12 and 3R models.
Introducing nVent’s WeatherPro Outdoor Pad Mount Enclosures which protect controls, drives, power distribution components or contactors in outdoor commercial or industrial power distribution and control applications. The overlapping two-door models with no center post allow full-width access to enclosure interior.
IMO’s 2nd generation range of iView HMI’s are available in five touch screen sizes 4.3”, 7.0”, 10.4”, 12.1” and 15.0”. The HMI range options include E Series models for simple applications, M Series models for medium range applications and H Series models with higher capability for more demanding applications. The new HMI’s have high resolution 65K colour resistive touch LCD TFT screens operating on an ARM based Processor. The compact and well-designed bodies are packed with features.
The SKINTOP MULTI-M is a round, multi-cable bushing system that provides space-saving, high packing density for unharnessed cables. The compact design uses highly elastic gel technology to make pre-puncturing unnecessary, providing IP68 protection for cables, while unused entry points remain securely sealed to prevent entry of external elements. SKINTOP MULTI-M is UV- and oil-resistant, and silicon- and halogen-free.
IDEC Corporation has released a complete product line of S3TL series ferrules, wire strippers, crimpers, and screwdrivers. Properly installed ferrules provide dependable wire terminations to both screw and push-in terminals, but installers and technicians need suitably rated parts and associated tools for making these connections, which are provided by this new line of products.
Southco, Inc. has recently introduced the newest product in its successful C2 series of lever latches, with a new push to lock option that incorporates an auto-relock feature. With customizable features, versatile locking styles and a streamlined industrial appearance, the push to lock C2 Lever Latch provides upgraded functionality that can be used to demonstrate compliance with industry regulations.