IronHorse ES1 AC drives allow simple AC motor control for 3/4 up to 2 hp 230 VAC three-phase motors from a single-phase 120 VAC or 230 VAC input. These drives are proudly made in the USA and feature a simplified setup, requiring no software or parameters. The entire drive configuration is done through hardware trim pots for all settings, including minimum speed, maximum speed, current limit, acceleration, deceleration, boost, and DC injection braking.
AchieVe PSA series NEC Class 2 power supplies combine a compact form factor with energy-limited DC outputs, providing safe, reliable power for low-voltage control and automation circuits. Their competitive pricing and slim profile make them ideal for small control loads and space-limited enclosures. The power supplies feature a wide 85-264 VAC input range and adjustable 5, 12, or 24 VDC outputs across 15-100 W models. With efficiencies up to 91%, they minimize energy loss and heat dissipation within enclosures. Their IP20 finger-safe terminals prevent accidental contact with live components during installation and maintenance.
Toshiba International Corporation (TIC) announces the launch of the Toshiba 3000 TP (three phase) Series Uninterruptible Power System (UPS). The Toshiba 3000 TP Series UPS offers exceptional reliability and 96.5% efficiency for mission-critical applications, perfectly suited for operations in edge data centers, enterprise IT systems, and commercial/retail markets. Designed as a modular and scalable UPS supporting 480V 60Hz applications, the Toshiba 3000 TP offers capacity options of 40, 80, 120, 160, and 200 kW.
A pole/mast mounting bracket is now available in the accessory range for the secure and stable mounting of IP rated electronic enclosures to poles and masts of various diameters. Thanks to its special design, the new mounting bracket offers flexible application: it is suitable for smaller pole diameters (minimum 1.18″) as well as for masts and poles with diameters greater than 2.76″. Attachment is possible using cable ties or stainless steel screw bands.
RHINO PSR series power supplies with tool‑free spring clamp terminals provide secure, vibration‑resistant connections that never need retorquing, delivering long‑term reliability in industrial panels. These competitively priced power supplies combine an ultra‑slim design with rugged metal or aluminum housings, making them ideal for space‑constrained control cabinets. With high efficiency, high power density, and constant‑current overcurrent protection, the PSR series is well‑suited for charging and other demanding loads.
Jonard Tools’ 12-Fiber LC/APC Pigtail Pack is engineered for superior performance and effortless installation in fiber optic networks. Each pack includes twelve color-coded fibers with precision-polished LC/APC connectors, allowing quick identification, fusion splicing, and deployment in high-density environments. Manufactured with 900 µm tight-buffered fibers, these pigtails provide durability, flexibility, and consistent optical performance. Every fiber is factory-tested for insertion and return loss, ensuring reliable connections in single-mode applications such as FTTH, data centers, and telecommunications networks.
Toshiba International Corporation (TIC) has recently announced the launch of its new WC1 Active Front End (AFE) Drive. A drive engineered to solve a common industry problem: achieving superior power quality without the high cost and complexity of traditional solutions. By incorporating cutting-edge silicon carbide (SiC) MOSFET technology, the WC1 eliminates the need for bulky, expensive external harmonic filters, potentially resulting in significant savings on installation and operational costs.
Schneider Electric has recently launched TeSys Tera, a next-generation intelligent motor management system designed for demanding industrial environments. Built on a century of motor management expertise, TeSys Tera unifies protection, control and monitoring to reduce equipment failures, lower energy costs and extend asset life across industries including water and wastewater, metal, mineral and mining, chemical, petrochemical, pharmaceutical and oil and gas. The company introduced the system at Texas Water 2026, the largest regional water conference in the United States.
Building on previously communicated updates, nVent Hoffman have made additional updates to the Continuous Hinge with Clamps LP, Type 4 Enclosure (A12) portfolio. The single-door enclosure solution has been redesigned to achieve a universal rating, with the enclosure suitable for both indoor and outdoor applications. All hardware is stainless steel, including the screw-down door clamps and heavy-gauge hinge pin. The door clamp count and position have been re-defined to achieve optimal compression of the seamless, foam-in-place gasket.
Han-Eco®, Han® B and Han® HPR are the first connector series featuring Size 4 hoods/housings and inserts. This new size, an intermediary between Han® 3 and Han® 6, offers space savings of up to 40% compared to the next larger size. HARTING thus offers sustainable solutions for environments where installation space is limited to a…
Rittal LLC has launched its VX Hybrid Double Door enclosure system, engineered to deliver industry-leading strength without sacrificing ease of movement. This new enclosure combines the best of both worlds: a modular, easily configurable design meets a standalone, closed system that offers maximum ease of use and simplicity. This hybrid solution immediately benefits customers across heavy industries including mining & construction, utilities, oil & gas, water & waste,…
Hirose has expanded its DF22 Series of high-current power connectors with a new branch adapter. The DF22B Series is designed to simplify wiring, while reducing cabling and installation time. Compared to traditional wiring methods, branch wiring reduces the number of cabling leads, offering significant space savings. The DF22 Series power connector utilizes a four-point contact…
April 28, 2026 WSCAD is now available in the U.S. to help engineers, machine and panel builders work faster, reduce repetitive tasks and upskill employees WSCAD, developer of the world’s first AI-powered electrical design platform, has officially launched its U.S. market version of ELECTRIX AI. To experience the platform’s capabilities, an interactive webinar will be…
Leveraging your power supply unit as a data source offers significant advantages for both operating companies and system manufacturers. By integrating power supplies with IO-Link or EtherCAT, users gain access to valuable real-time information.
April 27, 2026 RS continues to fulfill its purpose of Making Amazing Happen for a Better World and becoming the first choice for all of its stakeholders one achievement at a time. RS, a high-service global product and service solutions provider for industrial customers, continued to embody its corporate purpose of Making Amazing Happen for…
Bender now offers three new modular residual current devices (MRCD) for industrial installations. The devices have been developed in accordance with DIN EN 60947-2 Annex M and can be used for protection purposes in industrial electrical installations where conventional residual current devices (RCDs) cannot be used. The two residual current devices LINETRAXX® SmartDetect MRCDB425-D and…