| | | | |

A Perfect Match – ABB Jokab Sensors and B&R Safety Technology

October 20, 2020

Broad portfolio simplifies design of protection and safety systems

ABB Jokab’s proven range of innovative safety sensors can now be used directly with B&R’s integrated safety technology. The ABB portfolio includes a complete set of gate closures, light curtains and safety mats. The broad selection will make it easier than ever to implement safety concepts.

Safety products from ABB Jokab are simply wired to B&R’s safe I/O modules. Both B&R safety technology and the ABB safety portfolio satisfy the requirements of ISO 13849-1 up to PL e / Cat. 4.

Reduced costs

ABB Jokab safety sensors support the wiring of a safety function with multiple different sensors connected in series. This could be used to connect a series of safety gates, for example. This approach reduces cabling and installation costs immensely and thus also reduces the number of safe input channels required. The series connection does not change the maximum safety level of PL e / Cat. 4.

Modern technology

ABB Jokab offers a comprehensive range of safety components that greatly simplify the design of protection and safety systems. The proven range of innovative safety products includes the well-known Eden series of inductive gate switches and Safeball devices for two-hand control.

Important Links Bar.jpg

https://www.br-automation.com/en-us/about-us/press-room/a-perfect-match-abb-jokab-sensors-and-br-safety-technology-19-10-2020/

Check Availability

 

Post Views: 341

Related Articles

NCC Connectors Suit Applications With Restricted Space and Offer High Protection Levels When Connected and Disconnected
| | |

NCC Connectors Suit Applications With Restricted Space and Offer High Protection Levels When Connected and Disconnected

The newly developed products target the growing need for suitable, reliable circular connectors in many applications including lighting and test and measurement instrumentation. The Series 670 are 5-pin subminiature connectors with a bayonet closure and a cable bushing from 3.5 to 5.0mm. The flange-type socket is provided with soldered and dip-soldered contacts.

 

 

 

PBUS-29-Flir-MR265MeterAndThermal-400.jpg
| |

Teledyne FLIR Releases FLIR MR265 Moisture Meter and Thermal Imager with MSX

Designed to visually scan large areas for moisture issues, air leaks, electrical problems, and more, the FLIR MR265 Moisture Meter and Thermal Imager with MSX empowers professionals to quickly identify and locate water leaks and other moisture issues at the source. This dual thermal imager and measurement tool combines a 160 × 120 resolution Lepton thermal camera, visual camera, laser pointer, and both pin and pinless moisture detection.

 

 

 

Altech CX Series Spring Clamp Terminal Blocks
| | | |

Altech’s Compact Spring Clamp Terminal Blocks

Altech has introduced a spring clamp terminal block it claims is the industry’s most compact. The CX Series is not only compact, but easy to use and install, saving the user time and space in a panel. As a result, the CX Series is a cost-saving alternative to other screw or spring clamp blocks n the market. 

Banner Engineering: Durable, 19-Pin and 12-Pin M23 Cordsets Deliver Both Signals and Power
| |

Banner Engineering: Durable, 19-Pin and 12-Pin M23 Cordsets Deliver Both Signals and Power

Banner now offers 19-pin and 12-pin male, female, and double-ended M23 cordsets in various lengths for high-density I/O cables. They deliver up to 8 amps of power with 19-pin cordsets and 4 amps with 12-pin cordsets. M23 Cordsets are ideal for use in harsh industrial environments with an overmolded, IP67-rated design.

Panduit: Cable Entry Systems
| |

Panduit: Cable Entry Systems

The Cable Entry Systems from Panduit offer a safe, organized method to transition both terminated and unterminated cables through enclosures and electrical equipment, providing strain relief while maintaining IP/NEMA ingress sealing ratings. These Cable Entry Systems offer the lowest total installed cost compared to traditional cable glands or cord grips, simplifying the installation and managing numerous cables in a very dense space. These design benefits provide up to 80% installation time and space savings.

PB-53-ABB-CPS1-400.jpg
| | | |

ABB: New Single-Phase Power Supplies Reduce Harmful CO2 Emissions

ABB launches its new CP-S.1 range of primary switch mode 24 V DC power supplies, combining efficiency and reliability with an unrivalled power-to-space ratio. With an efficiency of up to 94 percent, the CP-S.1 24/40.0 power supply is able to generate a 1.4 ton CO2 saving over a typical lifetime of ten years – compared to a device with 92 percent efficiency. This is equivalent to the same amount of CO2 required to charge 160,000 smartphones.

 

 

 

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • KEBA: KeDrive D5 – Flexible and Compact

    KEBA: KeDrive D5 – Flexible and Compact

    With the KeDrive D5 series of single-axis servo drives, KEBA is expanding it’s KeDrive product family specifically for drive applications with a small number of axes. KeDrive D5 is a multi-tool that can be easily integrated into your application. As part of KEBA’s open modular automation platform Kemro X, the new servo controller for single-axis… Read More…

  • Parker: DFplus Generation IV Proportional Valves for Demanding Industrial Applications

    Parker: DFplus Generation IV Proportional Valves for Demanding Industrial Applications

    The Hydraulic Valve Systems Division of Parker Hannifin Corporation has recently announced the launch of its DFplus Generation IV proportional valves. The new valve’s electronics have been fundamentally revised, expanding its communication capabilities and improving connectivity for demanding industrial applications. Mechanical components such as its patented voice coil drive (VCD), the basis for the established performance… Read More…