EPLAN Data Portal Update 2 / July 2021

August 9, 2021

Since July 30th, in addition to updated data EPLAN are very pleased to announce the following new partners:

New manufacturer catalogs

  •    –   Balluff GmbH (NFPA Data) – 63 new data sets with sensors
  •    –   Dehn + Söhne GmbH & Co. KG (NFPA Data) – 54 new data sets with protection devices

New and update data sets

  •    –   ABB Stotz Kontakt GmbH – 38 new data sets with protection devices and converters
  •    –   Aventics GmbH – 1748 new and 3555 updated data sets with valves and pressure regulators
  •    –   Bosch Rexroth AG – 1 new data set with a motor
  •    –   Danfoss Drives A/S – 64 new data sets with converters
  •    –   Dinkle Enterprise Co., Ltd. – 129 new and 2 updated data sets with terminals
  •    –   ETI Elektroelement d.o.o. – 43 new and 72 updated data sets with protection devices
  •    –   Hitachi Industrial Equipment Systems Co. – 40 new data sets with converters, terminators and filters
  •    –   ifm electronic gmbh – 119 new and 391 updated data sets with cables, PLC, sensors, signal devices, general, transmission paths, lights, switches and pushbuttons
  •    –   Suzhou Inovance Technology Co., Ltd. – 262 new data sets with converters
  •    –   Janitza electronics GmbH – 6 new and 146 updated data sets with converters and measurement devices
  •    –   Leuze electronic GmbH + Co. KG – 75 new data sets with sensors
  •    –   Pilz GmbH & Co. KG – 10 new and 20 updated data sets with PLC
  •    –   Rockwell Automation – 96 new and 4 updated data sets with converters
  •    –   Schneider Electric SA – 50 new and 52 updated data sets with converters, motors, PLC, relays and contactors
  •    –   SEW-EURODRIVE GmbH & Co. KG – 2 updated data sets with converters
  •    –   Siemens AG – 56 new data sets with cables
  •    –   WAGO Kontakttechnik GmbH & Co. KG – 145 new and 302 updated data sets with terminals, PLC, transmission paths, measuring instruments, test devices, user-defined rails, voltage sources and generators


  •    –   2 new manufacturer
  •    –   18 updated manufacturer
  •    –   2,999 new data sets
  •    –   4,546 updated data sets
  •    –   0 deleted data set
  •    –   3,521 new parts with EDS
  •    –   In total 356,267 parts with EDS




Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • Icotek: TE Thread Extension for Cable Glands and Cable Entry Plates, M32 / M50

    Icotek: TE Thread Extension for Cable Glands and Cable Entry Plates, M32 / M50

    The icotek cable glands and cable entry plates with metric thread are screwed with a locknut during assembly. If the thread lengths are not sufficient, for example when mounting on sandwich panels or thick concrete walls, icotek offers a practical solution: the icotek TE thread extension. The icotek TE thread extension is available in two sizes (M32, M50) and in three lengths (35 mm, 60 mm, 120 mm) and represents a real innovation in the field of cable management. The different lengths can be flexibly combined or shortened at the designated points. Read More…

  • IBOCO: CL Wire Management Retainers

    IBOCO: CL Wire Management Retainers

    IBOCO’s full line of CL Wire Retainers provide many different sizes to match the myriad of products that compound the IBOCO wire duct series. The full line of CL Wire Retainers are available in Dark Grey RAL 7021. These wire management retainers enable you to retain wires during installation, tremendously facilitating what can be a daunting task. They also provide additional strain relief of wire duct fingers, while eliminating bulging against the sidewall. IBOCO CL wire retainers offer a great time-saving solution to customers. Read More…