| | | | |

Cembre: Precut 4mm Push in Markers, for PMF Holders


March 19, 2021

SerieFLAT MG-TPMF tags are used for marking cables, conduit, tubes, conductors and components. Presented in stem format, tags are simply snapped off their stems and inserted into the appropriate holders. Consult Cembre for other colours.

Note: UV resistance may vary between colours.

CEI EN 60950-1

Information technology equipment – Safety

Compliance is checked by inspection and by rubbing the marking by hand for 15 s with a piece of cloth soaked with water and again for 15 s with a piece of cloth soaked with hexane. After this test, the marking shall be legible; it shall not be possible to remove marking plates easily and they shall show no curling.

CEI EN 61010-1

Ed.2 equivalent to VDE 0411-1

Safety indications for electric devices for measurement, control and laboratory use

This regulation requires that both material and the print shall withstand‚ cleaning with chemical agents commonly used in industry. By rubbing manually by hand, without excessive pressure, for 30 seconds with a cloth soaked in the specific detergent or, if not specified, Isopropyl Alcohol.


This test was created to simulate cleaning with chemical products commonly used on various surfaces. By wiping with a cloth soaked in 95% Ethanol 30 times and making a visual inspection after every 10 passes.




Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • Banner Engineering: New Comprehensive M8 Cordset Selection

    Banner Engineering: New Comprehensive M8 Cordset Selection

    Banner now offers a broader range of M8 cordsets to support compatible Banner products and other industrial M8 devices. Available lengths include 1, 2, 5, 8, and 10 m of both female and male single- and double-ended M8 cordsets with the option of three or four pins. A greater selection means more options for more… Read More…

  • Saginaw: NextGen Enclosure Builder

    Saginaw: NextGen Enclosure Builder

    Introducing Saginaw’s latest enclosure building tool. It helps you discover the perfect enclosure by narrowing down your options based on your preferences. Select a starting point, and it will guide you through the process, leading you to the ideal NextGen enclosure. Read More…