| | | | | |

DIN-rail Power Supply from PULS Power Features Integrated LED Display

July 9, 2021

The new CP20.248 extends PULS Power’s product portfolio by adding a 24V, 20A 1-phase DIN-rail power supply with an integrated display. The LED display means a reliable and inexpensive condition monitoring feature can be integrated into almost any system allowing users to benefit immediately from faster fault diagnosis and increased system availability.

The display shows important status information about the power supply for commissioning and maintenance and can display real-time information and recorded data. The real-time data supplied by the CP20.248 includes the input and output voltage, output current, operating hours and temperature inside the device.

The recorded data gives users insight into the number of transients on the input side as well as minimum and maximum voltage and temperature values fand more. This information can help the system engineer optimise an entire application in terms of reliability and to identify the cause of faults or errors more efficiently. The display and data storage have an independent power source ensuring that all the information is still available, even if the power supply fails.

For remote status monitoring two relay contacts for DC-OK and alarm signals are provided. Two additional inputs allow the power supply to be put into an energy-saving standby mode using the remote ON / OFF function and automatic load sharing in parallel operation for greater power output can be realised. Parallel operation ensures an optimised temperature balance between the connected power supplies, prolonging the service life of the devices.

All CP20 versions share the same compact housing with dimensions of 48x124x127mm, which includes the space required for the integrated display. This is made possible by a very high efficiency of 95.6%. As a result of the low power losses, less heat is generated in the housing and the clearance and creepage distances can be reduced.

The PULS CP20 has an operating temperature range from -25 to +70°C, 50% extra output power for up to 5s, has fully international safety agency approvals and a three-year warranty.

Applications for the PULS CP20 include industrial systems and machine building, SMART buildings and factories, Industry 4.0, security and CCTV, instrumentation and measuring systems.

  • AC 100-240V wide-range input
  • Width only 48mm
  • Efficiency up to 95.6%
  • Excellent partial load efficiency
  • 20% Output power reserves
  • Easy fuse breaking – 3 times nominal current for 12ms
  • Safe Hiccup PLUS overload mode
  • Active power factor correction (PFC)
  • Minimal inrush current surge
  • Full power between -25°C and +60°C
  • DC-OK relay contact
  • Current sharing feature for parallel use
  • Enhanced DC input

More Information

Check Availability

Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More


Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.


Products for Panel Builders

  • OKW: IK/IP-Rated SOLID-BOX for Industrial Touch Screen and Display Electronics

    OKW: IK/IP-Rated SOLID-BOX for Industrial Touch Screen and Display Electronics

    More electronics designers are specifying OKW’s tough SOLID-BOX to safeguard sensitive touch screens, control panels and displays in harsh industrial environments. IK 08 (impact) and IP 66/IP 67 (ingress) protection make SOLID-BOX ideal for plant and machine construction, HVAC, IoT/IIoT, Smart Factory/Industry 4.0, gateways, data loggers, ICT, electrical installations, measurement/control, agriculture/farming, sensor systems and safety… Read More…

  • LOVATO Electric: New Double Contact Elements and Auto-Monitoring Contact Element

    LOVATO Electric: New Double Contact Elements and Auto-Monitoring Contact Element

    LOVATO Electric enriches the range of pushbutton and selectors Platinum series with the new double contact elements and auto-monitoring contact element. The double contact elements provide the flexibility of two contacts (1NO+1NC, 2NO or 2NC) within the same dimensions as a single contact (LPXC10 or LPXC01). The new auto–monitoring contact is replacing the previous auto-monitoring contact versions (LPXC01SM and LPXC02SM)… Read More…