AutomationDirect Adds VNTC Tray Cable

June 9, 2020

VNTC (Vinyl Nylon Tray Cable) 600 Volt Type TC-ER control cables from AutomationDirect are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial and where superior electrical properties are desired. VNTC cable is available in 18 AWG to 10 AWG with 3 to 24 unshielded copper conductors. Cables are cut to length in 1-foot increments with a 20-foot minimum.

 Cable is rated for use in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502 and listed for exposed runs (TC-ER) per NEC 336.10. VNTC cable, with nylon layer insulation and THHN Polyvinyl Chloride jacket, is silicone free and can operate continuously at temperatures up to 75°C in wet locations and 90°C in dry locations.

Made in the USA, VNTC tray cable starts at $0.21 / ft. (20 ft. min.) and has a 1-year warranty.

Important Links Bar.jpg

www.automationdirect.com/vntc-cable

 

Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More


Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.


Products for Panel Builders

  • WAGO: Power Supply Base

    WAGO: Power Supply Base

    The WAGO Power Supply Base with the industry-proven Push-in CAGE CLAMP connection provides essential functionality during operation and stands out for its cost-effectiveness. The new devices offer quick, reliable and tool-free connections, along with good efficiency. Read More…

  • Weidmuller: u-control M3000/M4000 High-Performance Series IT & OT PAC Controllers Achieve True Convergence

    Weidmuller: u-control M3000/M4000 High-Performance Series IT & OT PAC Controllers Achieve True Convergence

    Weidmuller USA has recently unveiled the innovative M3000 and M4000 series of PAC Controllers for the perfect pairing of IT and OT for a wide array of industrial settings. This highly advanced Programmable Automation Controller (PAC) series integrates the functionality of a PLC and a PC with a control and edge system – in one device. “With… Read More…