| | | |

icotek: EMC Shield Clamps for PE Conductors

pbus 92 icotek emcshieldclampsforpeconductors 1200

October 6, 2026

EMC shield clamps are used, where the shield of cables must be connected to the earth potential. They are easy to use and effective in earthing single cable shields.

The shield clamps RCL are mounted on ring cable lugs which can be crimped on PE conductors.

The size of the ring cable lug diameter is shown by differing colours:

  • Red: 0.5 – 1.5 mm²
  • Blue: 1.0 – 2.5 mm²
  • Yellow: 4 – 6 mm²

The integrated flat plug-in connection of the FCL clamps allows components such as PE cables to be connected particularly quickly and easily, and disconnected again if necessary. 

The RCLZ-M / FCLZ / FCLZ-M shield clamps allow a secure fixing of the cable with cable ties.

Important_Links_Bar.jpg

More Information

Post Views: 11

Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • icotek: EMC Shield Clamps for PE Conductors

    icotek: EMC Shield Clamps for PE Conductors

    EMC shield clamps are used, where the shield of cables must be connected to the earth potential. They are easy to use and effective in earthing single cable shields. The shield clamps RCL are mounted on ring cable lugs which can be crimped on PE conductors. The integrated flat plug-in connection of the FCL clamps… Read More…

  • icotek: KEL-ERM | Split Cable Entry Frames

    icotek: KEL-ERM | Split Cable Entry Frames

    The KEL-ERM is an optimised further development of the proven KEL-ER and sets new standards for split cable entries for pre-assembled cables. Designed for demanding industrial applications, it combines maximum sealing performance, ease of installation and exceptional flexibility in a well-engineered system. In addition to the high IP66 protection rating when using single cable grommets, the… Read More…