The new CU81xx UPS series are designed for universal use. Due above all to the flexible connection options extending up to One Cable Technology for uninterruptible power supply (UPS-OCT), it is suitable for an extremely broad range of applications. This includes the entire range of Beckhoff components – in particular the Industrial, Panel and Embedded PCs – as well as third-party products.
IMO Precision Controls BPS Series 15W-240W AC-DC DIN Rail Power Supply Units deliver high efficiency and are subjected to a 100% full load burn in testing. The BPS Series delivers short circuit protection and a universal output of 90-264VAC/ 120-375VDC, and comes with a back-up parallel connection.
The QUINT POWER family has been extended to include a new powerful power supply with 110 V DC. It is suitable for applications from 110 V DC to 135 V DC. This means that you can now use just one device to supply applications that previously required several devices to be connected in series. This saves space in the control cabinet and reduces your wiring effort.
Take advantage of Bihl+Wiedemann’s new generation of advanced 30 V power supplies. It is specially designed for ASi-5 communication and is also ideal for parallel ASi-5/ASi-3 communication. They have optimized all six new 30 V power supplies for use with our ASi-5/ASi-3 Gateways. Interferences common in power supplies, are reduced to a minimum in areas relevant to ASi-5 and ASi-3 communication.
Recently, IMO was very pleased to announce that it had independently achieved UL PVRSS (Photovoltaic Rapid Shutdown System) listing for its FireRaptor Rapid Shutdown Device on the SMA Sunny Boy solar inverters from 3.0kW to 7.7kW and SMA TRIPOWER solar inverters from 33kW to 62kW under UL1741 guidelines.
SCHURTER’s proven power entry module, series DD11, provides a high level of functional integration in the most minimal of package dimensions. The power entry module is ideally suited for equipment with low profile panels. Consisting of an IEC appliance inlet (C14), which is compatible with cord retention, 1- or 2-pole fuseholder, and power ON/OFF switch, the DD11 is now available with side mounting flanges in addition to the existing model with top and bottom flanges.
Cornell Dubilier Electronics introduces two new series of Hybrid LIC Supercapacitors in response to the growing need for ultra-high capacitance values at higher operating voltages. The new VMF and VPF Series operate at 3.8 WVDC with capacitance values up to 220 Farads. The higher voltage results in increased energy density.
Bel Power Solutions has recently announced the TET4000-48-069RAH, a 4000 W power supply designed to provide the highest efficiency (Titanium) power conversion for datacenters being built to Open Compute Project (OCP), Open Data Center Committee (ODCC) or Central Office Re-architected as a Datacenter (CORD) standards. The TET4000-48-069RAH is the highest power 48 VDC model in Bel Power’s power supply portfolio and one of very few 4000 W 48 VDC server power supplies available as standard product.
Rockwell Automation has recently released new sizes in its line of energy- and space-saving Allen-Bradley Bulletin 300 NEMA contactors. The contactors, now available in NEMA sizes 00 to 8, feature universal electronic coils that reduce inrush apparent power (VA) by up to 68% and sealed VA by over 75% compared to standard, non-electronic coils. The electronic coils also save engineering time by covering 20 to 500 V AC/DC coil voltages with only four coil options, greatly simplifying selection.
Bel Power Solutions recently announced the expansion of their portfolio to include the TET3200-12-069RA, a 3200 W Titanium efficient AC-DC front-end power supply that can convert up to 277 VAC into a main output of 12 VDC for powering intermediate bus architectures (IBA) in high performance and high reliability servers, routers and network switches and applications.
TT Electronics recently announced the launch of its PAA and PAAM series of AC-DC encapsulated power modules with enhanced power density, ideal for space constrained industrial and medical electronic equipment applications. Available in power ratings ranging from 5 to 150 watts, the PAA encapsulated modules are PCB mountable in a compact footprint starting at 1.1” x 1.5” (8.05W/in³).
Bel Power Solutions, a Bel group company (NASDAQ: BELFA and BELFB), recently announced the ACC750 (industrial) and MCC750 (medical) Series of convection cooled power supplies which are available in a couple of single output voltages. The natural convection cooling operation (without a fan) is particularly suitable for environments sensitive to acoustical noise.
Siemens Smart Infrastructure released its new public fast charger Sicharge D for the IEC markets. It is suited for highway and urban fast charging stations, city parking as well as shopping malls and provides one of highest peak efficiencies on the market at 96 percent, scalable charging power and dynamic power sharing. “With its upgradability and dynamic charging, it is a big step forward to support the future of eMobility.”
The Eaton 9PX is a proven, best-in-class online UPS featuring ABM technology, which extends battery service life up to 50 percent. With double-conversion topology for constant power conditioning and battery packs for extended runtime, the 9PX tower/rackmount UPS is built for scalable deployment and features a graphical LCD interface. Select 9PX UPS models are bundled with the Eaton Gigabit Network card, the first in the industry to comply with both UL and IEC cybersecurity standards.
Modern-day automation places demands on the efficiency of each and every system. Balluff power supplies are designed by Balluff with control products in mind, so you can be sure they will integrate perfectly with your control suite.
B&K Precision recently announced the 9140 Series Triple Output Multi-Range DC Power Supplies. With three isolated and individually controllable outputs, the 9140 (32 V, 8 A) and 9141 (60 V, 4 A) provide up to 300 W of clean power with low ripple and noise or 100 W per channel in a compact 2U half-rack form factor. The front panel features a 4.3-inch LCD and unique output terminals that support sheathed banana plugs or spade lug type connectors.